AX8600S・AX8300Sソフトウェアマニュアル
コンフィグレーションコマンドレファレンス Vol.3
Ver. 12.8対応Rev.1
AX86S-S006-70
目 次
- 前書き
- 変更内容
- はじめに
- 第1編 このマニュアルの読み方
- 1. このマニュアルの読み方
- コマンドの記述形式
- コマンドモード一覧
- パラメータに指定できる値
- 第2編 IPパケット中継
- 2. IPv4・ARP・ICMP
- arp
- arp dynamic-limit
- arp max-send-count
- arp send-interval
- arp timeout
- arp-limit
- ip address
- ip conflict-detection
- ip icmp rate-limit unreachable
- ip local-proxy-arp
- ip mtu
- ip proxy-arp
- ip redirects
- ip source-route
- ip subnet-broadcast
- vrf forwarding
- 3. IPv6・NDP・ICMPv6
- ipv6 address
- ipv6 enable
- ipv6 icmp error-interval
- ipv6 icmp nodeinfo-query
- ipv6 nd dynamic-limit
- ipv6 nd onlink-check
- ipv6 nd stale-time
- ipv6 nd warning-threshold
- ipv6 neighbor
- ipv6 redirects
- ipv6 source-route
- nd-limit
- vrf forwarding
- 4. ループバックインタフェース
- interface loopback
- ip address（loopback）
- ipv6 address（loopback）
- system-source-address
- vrf forwarding（loopback）
- 5. VRF
- import inter-vrf
- import multicast inter-vrf
- ipv6 import inter-vrf
- ipv6 import multicast inter-vrf
- ipv6 maximum routes
- maximum routes
- vrf definition
- 6. Nullインタフェース
- interface null
- 7. uRPF
- ip urpf
- ip verify unicast source reachable-via
- ipv6 verify unicast source reachable-via
- 8. ポリシーベースルーティング
- default
- ip policy-list
- ip policy-list rearrange
- ipv6 policy-list
- ipv6 policy-list rearrange
- policy-based-routing suspend-update
- policy-interface
- 9. RA
- ipv6 hop-limit
- ipv6 nd dns-search-list
- ipv6 nd dns-server
- ipv6 nd link-mtu
- ipv6 nd managed-config-flag
- ipv6 nd no-advertise-link-address
- ipv6 nd ns-interval
- ipv6 nd other-config-flag
- ipv6 nd prefix
- ipv6 nd ra-interval
- ipv6 nd ra-lifetime
- ipv6 nd reachable-time
- ipv6 nd router-preference
- ipv6 nd suppress-ra
- 10. DHCP/BOOTPリレーエージェント
- ip dhcp relay gateway
- ip dhcp relay information no-check
- ip dhcp relay information option server-id-override
- ip dhcp relay information option-insert
- ip dhcp relay maximum-hop-count
- ip dhcp relay source-interface
- ip helper-address
- 11. DHCPv6リレーエージェント
- ipv6 dhcp relay destination
- ipv6 dhcp relay maximum-hop-count
- ipv6 dhcp relay source-interface
- ipv6 dhcp relay static-route-setting
- 12. VRRP
- vrrp accept
- vrrp authentication
- vrrp follow
- vrrp ip
- vrrp ipv6
- vrrp mode
- vrrp name
- vrrp preempt
- vrrp preempt delay
- vrrp priority
- vrrp timers advertise
- vrrp timers non-preempt-swap
- vrrp track-target
- 第3編 ユニキャストルーティング
- 13. ルーティングオプション
- ip auto-class-route
- routing options auto-update-filter
- routing options graceful-restart time-limit
- 14. 経路集約
- ip summary-address
- ipv6 summary-address
- 15. スタティックルーティング（IPv4）
- ip route
- ip route static maximum-paths
- ip route static poll-interval
- ip route static poll-multiplier
- 16. スタティックルーティング（IPv6）
- ipv6 route
- ipv6 route static maximum-paths
- ipv6 route static poll-interval
- ipv6 route static poll-multiplier
- 17. RIP
- address-family ipv4
- auto-summary
- default-metric
- disable
- distance
- exit-address-family
- generate-secondary-route
- inherit-metric
- ip rip authentication key
- ip rip v2-broadcast
- ip rip version
- metric-offset
- neighbor
- network
- passive-interface
- router rip
- timers basic
- version
- 18. RIPng
- default-metric
- disable
- distance
- generate-secondary-route
- inherit-metric
- ipv6 rip enable
- ipv6 rip metric-offset
- ipv6 router rip
- passive-interface
- timers basic
- 19. OSPF
- area authentication
- area default-cost
- area nssa
- area nssa translate
- area range
- area stub
- area virtual-link
- areaid-format
- default-metric
- disable
- distance ospf
- graceful-restart mode
- graceful-restart restart-time
- graceful-restart strict-lsa-checking
- ip ospf area
- ip ospf authentication
- ip ospf authentication-key
- ip ospf cost
- ip ospf dead-interval
- ip ospf hello-interval
- ip ospf message-digest-key
- ip ospf network
- ip ospf priority
- ip ospf retransmit-interval
- ip ospf track
- ip ospf transmit-delay
- max-metric router-lsa
- maximum-paths
- message-size
- neighbor
- network
- nsr
- passive-interface
- router-id
- router ospf
- suppress-fa
- timers spf
- 20. OSPFv3
- area default-cost
- area range
- area stub
- area virtual-link
- areaid-format
- default-metric
- disable
- distance ospf
- graceful-restart mode
- graceful-restart restart-time
- graceful-restart strict-lsa-checking
- ipv6 ospf area
- ipv6 ospf cost
- ipv6 ospf dead-interval
- ipv6 ospf hello-interval
- ipv6 ospf network
- ipv6 ospf priority
- ipv6 ospf retransmit-interval
- ipv6 ospf track
- ipv6 ospf transmit-delay
- ipv6 router ospf
- max-metric router-lsa
- maximum-paths
- nsr
- message-size
- passive-interface
- router-id
- timers spf
- 21. BGP4/BGP4+
- address-family ipv4
- address-family ipv6
- bgp always-compare-med
- bgp bestpath compare-routerid
- bgp client-to-client reflection
- bgp cluster-id
- bgp confederation identifier
- bgp confederation peers
- bgp dampening
- bgp default local-preference
- bgp fast-external-fallover
- bgp graceful-restart mode
- bgp graceful-restart restart-time
- bgp graceful-restart stalepath-time
- bgp nexthop
- bgp router-id
- capability 4-byte-as
- default-information originate
- default-metric
- disable
- distance bgp
- exit-address-family
- maximum-paths
- neighbor activate
- neighbor always-nexthop-self
- neighbor as-override
- neighbor capability 4-byte-as
- neighbor description
- neighbor ebgp-multihop
- neighbor enforce-first-as-disable
- neighbor ha-mode nsr
- neighbor local-as
- neighbor maximum-prefix
- neighbor next-hop-self
- neighbor password
- neighbor peer-group（assigning members）
- neighbor peer-group（creating）
- neighbor permit-asloop
- neighbor remote-as
- neighbor remove-private-as
- neighbor route-reflector-client
- neighbor send-community
- neighbor set-nexthop-peer
- neighbor shutdown
- neighbor soft-reconfiguration
- neighbor timers
- neighbor track
- neighbor update-source
- neighbor weight
- network
- router bgp
- timers bgp
- 22. 経路フィルタリング
- distribute-list in（BGP4）【OP-BGP】
- distribute-list in（BGP4+）【OP-BGP】
- distribute-list in（OSPF）
- distribute-list in（OSPFv3）
- distribute-list in（RIP）
- distribute-list in（RIPng）
- distribute-list out（BGP4）【OP-BGP】
- distribute-list out（BGP4+）【OP-BGP】
- distribute-list out（OSPF）
- distribute-list out（OSPFv3）
- distribute-list out（RIP）
- distribute-list out（RIPng）
- ip as-path access-list【OP-BGP】
- ip community-list【OP-BGP】
- ip prefix-list
- ipv6 prefix-list
- match as-path【OP-BGP】
- match community【OP-BGP】
- match interface
- match ip address
- match ip route-source
- match ipv6 address
- match ipv6 route-source
- match origin【OP-BGP】
- match protocol
- match route-type
- match tag
- match vrf
- neighbor in（BGP4）【OP-BGP】
- neighbor in（BGP4+）【OP-BGP】
- neighbor out（BGP4）【OP-BGP】
- neighbor out（BGP4+）【OP-BGP】
- redistribute（BGP4）【OP-BGP】
- redistribute（BGP4+）【OP-BGP】
- redistribute（OSPF）
- redistribute（OSPFv3）
- redistribute（RIP）
- redistribute（RIPng）
- route-map
- set as-path prepend count【OP-BGP】
- set community【OP-BGP】
- set community-delete【OP-BGP】
- set distance
- set local-preference【OP-BGP】
- set metric
- set metric-type
- set origin【OP-BGP】
- set tag
- 第4編 マルチキャストルーティング
- 23. IPv4マルチキャストルーティングプロトコル
- ip igmp group-limit
- ip igmp last-member-query-count
- ip igmp last-member-query-interval
- ip igmp last-member-query-max-response-time
- ip igmp query-interval
- ip igmp router
- ip igmp source-limit
- ip igmp ssm-map enable
- ip igmp ssm-map static
- ip igmp static-group
- ip igmp version
- ip multicast multipath
- ip multicast-routing
- ip pim assert-metric
- ip pim assert-preference
- ip pim bsr-border
- ip pim bsr-candidate
- ip pim deletion-delay-time
- ip pim dr-priority
- ip pim keep-alive-time
- ip pim max-interface
- ip pim mcache-limit
- ip pim message-interval
- ip pim mroute-limit
- ip pim negative-cache-time
- ip pim nonstop-forwarding
- ip pim override-interval
- ip pim propagation-delay-time
- ip pim query-interval
- ip pim register-checksum
- ip pim register-probe-time
- ip pim rp-address
- ip pim rp-candidate
- ip pim rp-mapping-algorithm
- ip pim sparse-mode
- ip pim ssm
- 24. IPv6マルチキャストルーティングプロトコル
- ipv6 mld access-group
- ipv6 mld bandwidth-limit
- ipv6 mld bandwidth-limit-filter
- ipv6 mld channel-limit
- ipv6 mld channel-limit-filter
- ipv6 mld explicit-tracking
- ipv6 mld fast-leave
- ipv6 mld group-limit
- ipv6 mld query-interval
- ipv6 mld router
- ipv6 mld source-limit
- ipv6 mld ssm-map enable
- ipv6 mld ssm-map static
- ipv6 mld static-group
- ipv6 mld version
- ipv6 multicast bandwidth
- ipv6 multicast-routing
- ipv6 multicast join-prune-event logging enable
- ipv6 pim
- ipv6 pim assert-metric
- ipv6 pim assert-preference
- ipv6 pim bsr candidate bsr
- ipv6 pim bsr candidate rp
- ipv6 pim deletion-delay-time
- ipv6 pim direct
- ipv6 pim dr-priority
- ipv6 pim hello-interval
- ipv6 pim join-prune-interval
- ipv6 pim keep-alive-time
- ipv6 pim max-interface
- ipv6 pim mcache-limit
- ipv6 pim mroute-limit
- ipv6 pim negative-cache-time
- ipv6 pim nonstop-forwarding
- ipv6 pim override-interval
- ipv6 pim propagation-delay-time
- ipv6 pim register-probe-time
- ipv6 pim rp-address
- ipv6 pim rp-mapping-algorithm
- ipv6 pim ssm
- 第5編 ネットワーク経路監視機能
- 25. BFD
- bfd interval
- bfd multiplier
- track name
- type bfd
- 第6編 コンフィグレーションエラーメッセージ
- 26. コンフィグレーション編集時のエラーメッセージ
- 26.1 共通のエラー
- 26.2 IPv4・ARP・ICMP設定時のエラー
- 26.3 IPv6・NDP・ICMPv6設定時のエラー
- 26.4 VRF設定時のエラー
- 26.5 uRPF設定時のエラー
- 26.6 ポリシーベースルーティング設定時のエラー
- 26.7 RA設定時のエラー
- 26.8 DHCP/BOOTPリレーエージェント設定時のエラー
- 26.9 DHCPv6リレーエージェント設定時のエラー
- 26.10 VRRP設定時のエラー
- 26.11 経路集約設定時のエラー
- 26.12 スタティックルーティング設定時のエラー
- 26.13 RIPまたはRIPng設定時のエラー
- 26.14 OSPFまたはOSPFv3設定時のエラー
- 26.15 BGP4またはBGP4+設定時のエラー【OP-BGP】
- 26.16 経路フィルタリング設定時のエラー
- 26.17 IPv4およびIPv6マルチキャストルーティング設定時のエラー
- 26.18 BFD設定時のエラー
- 索引
All Rights Reserved, Copyright(C), 2014, 2019, ALAXALA Networks, Corp.