AX6700S・AX6600S・AX6300Sソフトウェアマニュアル
運用コマンドレファレンス Vol.2
Ver. 11.9対応
AX63S-S011-40
目 次
- 前書き
- 変更内容
- はじめに
- 第1編 このマニュアルの読み方
- 1. このマニュアルの読み方
- コマンドの記述形式
- パラメータに指定できる値
- 文字コード一覧
- 入力エラー位置指摘で表示するメッセージ
- 第2編 フィルタ
- 2. フィルタ
- show access-filter
- clear access-filter
- 3. アクセスリストロギング
- show access-log
- clear access-log
- show access-log flow
- clear access-log flow
- dump access-log
- restart access-log
- debug access-log
- no debug access-log
- 第3編 QoS
- 4. QoS
- show qos-flow
- clear qos-flow
- show qos queueing
- clear qos queueing
- show qos queueing distribution
- clear qos queueing distribution
- show qos queueing interface
- clear qos queueing interface
- show qos queueing to-cpu
- clear qos queueing to-cpu
- show shaper
- clear shaper
- show shaper <port list>
- clear shaper <port list>
- 第4編 レイヤ2認証
- 5. IEEE802.1X
- show dot1x statistics
- show dot1x
- clear dot1x statistics
- clear dot1x auth-state
- reauthenticate dot1x
- restart dot1x
- dump protocols dot1x
- show dot1x logging
- clear dot1x logging
- 6. Web認証
- set web-authentication user
- set web-authentication passwd
- set web-authentication vlan
- remove web-authentication user
- show web-authentication user
- show web-authentication login
- show web-authentication logging
- show web-authentication
- show web-authentication statistics
- clear web-authentication logging
- clear web-authentication statistics
- commit web-authentication
- store web-authentication
- load web-authentication
- clear web-authentication auth-state
- set web-authentication html-files
- clear web-authentication html-files
- show web-authentication html-files
- set web-authentication ssl-crt
- clear web-authentication ssl-crt
- show web-authentication ssl-crt
- restart web-authentication
- dump protocols web-authentication
- 7. MAC認証
- show mac-authentication login
- show mac-authentication logging
- show mac-authentication
- show mac-authentication statistics
- clear mac-authentication auth-state
- clear mac-authentication logging
- clear mac-authentication statistics
- set mac-authentication mac-address
- remove mac-authentication mac-address
- commit mac-authentication
- show mac-authentication mac-address
- store mac-authentication
- load mac-authentication
- restart mac-authentication
- dump protocols mac-authentication
- 8. 認証VLAN【OP-VAA】
- show fense server【OP-VAA】
- show fense statistics【OP-VAA】
- show fense logging【OP-VAA】
- clear fense statistics【OP-VAA】
- clear fense logging【OP-VAA】
- restart vaa【OP-VAA】
- dump protocols vaa【OP-VAA】
- 第5編 セキュリティ
- 9. DHCP snooping
- show ip dhcp snooping binding
- clear ip dhcp snooping binding
- show ip dhcp snooping statistics
- clear ip dhcp snooping statistics
- show ip arp inspection statistics
- clear ip arp inspection statistics
- show ip dhcp snooping logging
- clear ip dhcp snooping logging
- restart dhcp snooping
- dump protocols dhcp snooping
- 第6編 冗長化構成による高信頼化機能
- 10. BCU/CSU/MSUの冗長化
- inactivate standby
- activate standby
- redundancy force-switchover
- synchronize
- 11. GSRP
- show gsrp
- show gsrp aware
- clear gsrp
- set gsrp master
- clear gsrp port-up-delay
- clear gsrp forced-shift
- restart gsrp
- dump protocols gsrp
- 12. VRRP
- show vrrpstatus(IPv4)
- clear vrrpstatus(IPv4)
- swap vrrp(IPv4)
- show vrrpstatus(IPv6)
- clear vrrpstatus(IPv6)
- swap vrrp(IPv6)
- show track(IPv4)
- show track(IPv6)
- 第7編 ネットワークの障害検出による高信頼化機能
- 13. IEEE802.3ah/UDLD
- show efmoam
- show efmoam statistics
- clear efmoam statistics
- restart efmoam
- dump protocols efmoam
- 14. L2ループ検知
- show loop-detection
- show loop-detection statistics
- show loop-detection logging
- clear loop-detection statistics
- clear loop-detection logging
- restart loop-detection
- dump protocols loop-detection
- 15. CFM
- l2ping
- l2traceroute
- show cfm
- show cfm remote-mep
- show cfm fault
- show cfm l2traceroute-db
- show cfm statistics
- clear cfm remote-mep
- clear cfm fault
- clear cfm l2traceroute-db
- clear cfm statistics
- restart cfm
- dump protocols cfm
- 第8編 リモートネットワーク管理
- 16. SNMP
- show snmp
- show snmp pending
- snmp lookup
- snmp get
- snmp getnext
- snmp walk
- snmp getif
- snmp getroute
- snmp getarp
- snmp getforward
- snmp rget
- snmp rgetnext
- snmp rwalk
- snmp rgetroute
- snmp rgetarp
- 17. sFlow
- show sflow
- clear sflow statistics
- restart sflow
- dump sflow
- 第9編 隣接装置情報の管理
- 18. LLDP
- show lldp
- show lldp statistics
- clear lldp
- clear lldp statistics
- restart lldp
- dump protocols lldp
- 19. OADP
- show oadp
- show oadp statistics
- clear oadp
- clear oadp statistics
- restart oadp
- dump protocols oadp
- 索引
All Rights Reserved, Copyright(C), 2006, 2018, ALAXALA Networks, Corp.