1.1 Operational messages

An operation message is information output by the Switch that is intended to notify the administrator of changes in operating status or failure information. Operational messages can be saved in the device as a log. They can also be output to operation terminals and syslog servers. Using this log data, you can manage the switch operating status.

<Structure of this section>

• 1.1.1 Message Type

• 1.1.2 Message type

• 1.1.3 Output of the message

• 1.1.4 Operation log and type log

• 1.1.5 Output to remote server

• 1.1.6 System Message Trap