1.1.2 Message type

Message types are information that categorize operation messages, user command operations, configuration error messages, command response messages, and other messages according to their content. Operation messages can be classified according to the format of the information to be output. The following table lists the message types.

Table 1-2: List of message types
Message type	Description	Categorization by type of operational message
KEY	Command operations entered from the operation terminal	-
RSP	Messages output by switches to respond to entered commands.	-
SKY	Input command information by script	-
SRS	Messages that the device outputs to scripted input commands	-
ERR	Failure information for each event location on the switch	Event location format
EVT	Event information for each event location on the switch	Event location format
AUT	The information that is collected with the Layer 2 authentication functions for each program. Indicated as corresponding operation commands. show dot1x logging show web-authentication logging show mac-authentication logging	Operation Log Message Format
DSN	Information to be collected with DHCP snooping. Indicated as corresponding operation commands. show ip dhcp snooping logging	Operation Log Message Format

Legend:-: Not applicable