1.1.1 Message Type

The table below describes the types of output messages and gives references for those messages. Among the types of messages, information about the switches and functions output by the Switch is called an operation message.

Table 1-1: Message types and references
Message type		Reference
Configuration Error Messages		Error Messages on Configuration Editing in the manual Configuration Command Reference
Command response messages		"Response message" in "Operation Command Reference"
Operation message	Event location format	[2 Event location format
Operation message	Operation Log Message Format	Operation log messages for the following commands in the operation command reference show dot1x logging show web-authentication logging show mac-authentication logging show ip dhcp snooping logging