コンフィグレーションコマンドレファレンス Vol.1

[目次][索引][前へ][次へ]


47.1.26 GSRP情報

表47-26 GSRPのエラーメッセージ

メッセージ 内容
can not configure gsrp when spanning-tree is configured. スパニングツリーの設定があるため,GSRPが設定できません。
can not configure gsrp when virtual-router is configured. VRRPの設定があるため,GSRPが設定できません。
gsrp-<gsrp group id>: can not configure layer3-redundancy when GSRP ID is not in range from 1 to 4. GSRPグループIDが1から4以外の場合,layer3-redundancyは設定できません。
GSRPグループIDを1から4の範囲で設定してください。
<gsrp group id>:GSRPグループID
gsrp-<gsrp group id>: can not specify both any flush methods and direct-link on the channel-group <channel group number>. ダイレクトリンクに設定したチャネルグループにreset-flush-portまたはno-flush-portを指定できません。
該当の設定からチャネルグループを削除するか別のチャネルグループを使用してください。
<gsrp group id>:GSRPグループID
<channel group number>:チャネルグループ番号
gsrp-<gsrp group id>: can not specify both any flush methods and direct-link on the port <switch no.>/<nif no.>/<port no.>. ダイレクトリンクに設定したポートにreset-flush-portまたはno-flush-portを指定できません。
該当の設定からポートを削除するか別のポートを使用してください。
<gsrp group id>:GSRPグループID
<switch no.>/<nif no.>/<port no.>:スイッチ番号/NIF番号/ポート番号
gsrp-<gsrp group id>:can not specify the two or more flush methods on the channel-group <channel group number>. 同一チャネルグループに二つ以上のフラッシュ方法は指定できません。
該当の設定からチャネルグループを削除するか別のチャネルグループを使用してください。
<gsrp group id>:GSRPグループID
<channel group number>:チャネルグループ番号
gsrp-<gsrp group id>:can not specify the two or more flush methods on the port <switch no.>/<nif no.>/<port no.>. 同一ポートに二つ以上のフラッシュ方法は指定できません。
該当の設定からポートを削除するか別のポートを使用してください。
<gsrp group id>:GSRPグループID
<switch no.>/<nif no.>/<port no.>:スイッチ番号/NIF番号/ポート番号
gsrp-<gsrp group id>-<vlan group id>: vlan <vlan id> has been configured in another vlan-group. 指定されたVLANはすでにほかのVLANグループに設定されています。
ほかのVLANグループから削除するか,別のVLANを使用してください。
<gsrp group id>:GSRPグループID
<vlan group id>:VLANグループID
<vlan id>:VLAN ID

[目次][前へ][次へ]


[他社商品名称に関する表示]

All Rights Reserved, Copyright(C), 2014, 2019, ALAXALA Networks, Corp.