コンフィグレーションコマンドレファレンス Vol.1

[目次][索引][前へ][次へ]


47.1.27 VRRP情報

表47-27 VRRPのエラーメッセージ

メッセージ 内容
Cannot configure vrrp when gsrp is configured. GSRPが設定されているため,VRRPは設定できません。
Cannot set virtual router IP address because the other one of different address family already set. 異なるアドレスファミリの仮想IPアドレスが設定済みなので,仮想IPアドレスを設定できません。
Failure detection times is greater than check trial times. failure detection timesがcheck trial timesを超えています。
check trial times以下の値を設定してください。
Invalid virtual router IPv6 address. -- <value1> 仮想IPv6アドレスが不正です。
Network address of VRRP virtual router ip address and IP address is different on accept mode. VRRPの仮想IPアドレスと実IPアドレスのネットワークアドレスが異なります。
アクセプトモードを指定する場合,またはすでに指定している場合は,仮想IPアドレスと実IPアドレスのネットワークアドレスが一致するように指定してください。
Network prefix of VRRP virtual router ipv6 address and IPv6 address is different on accept mode. VRRPの仮想IPv6アドレスと実IPv6アドレスのネットワークプレフィックスが異なります。
アクセプトモードを指定する場合,または,すでに指定している場合は,仮想IPv6アドレスと実IPv6アドレスのネットワークプレフィックスが一致するように指定してください。
Not found channel-group <channel group number>. 指定されたチャネルグループは設定されていません。
<channel group number>:チャネルグループ番号
Only one track can assign for virtual router with priority mode. 一つの仮想ルータに割り当てられる優先度切替指定のtrackは一つだけです。
Only priority mode or decrement mode can specify as priority operation method at one virtual router. 一つの仮想ルータで優先度減算指定と優先度切替指定は混在できません。
Recovery detection times is greater than check trial times. recovery detection timesがcheck trial timesを超えています。
check trial times以下の値を設定してください。
The number of critical interfaces for virtual router is beyond limitation. 仮想ルータ当たりのCritical Interfaceの設定数が上限を超えました。

[目次][前へ][次へ]


[他社商品名称に関する表示]

All Rights Reserved, Copyright(C), 2014, 2019, ALAXALA Networks, Corp.