2.4.2 01XXXXXX
This section describes operation messages in which the two most significant digits of the message identifier are 01.
Message ID |
Event Level |
Message text |
---|---|---|
Content and response |
||
01100001 01100002 01100004 01200001 01200002 01200004 01300001 01300002 01300004 01400001 01400002 01400004 01600001 01600002 01600004 01700001 01700002 01700004 01800001 01800002 01800004 01900001 01900002 01900004 01910001 01910002 01910004 |
E7 |
Software failure occurred during operation. |
An error occurred in the software during operation. [Action] Normal operation might not be possible. Take the following actions:
|
||
01100003 01200003 01300003 01400003 01600003 01700003 01800003 01900003 01910003 |
E9 |
System restarted due to software failure occurred during initialization. |
An error occurred in the software during initialization, and the switch restarted. [Action] Check the log by executing the show logging command. If another problem is indicated in the log, take appropriate action according to the error message. |
||
01100005 01200005 01300005 01400005 01600005 01700005 01800005 01900005 01910005 |
E9 |
System restarted due to software failure occurred during operation. |
An error occurred in the software during operation, and the switch restarted. [Action] Check the log by executing the show logging command. If another problem is indicated in the log, take appropriate action according to the error message. |
||
01200187 |
E3 |
The temperature logging file can't be written. |
Writing of temperature logging information failed. [Action]
|
||
01700501 |
E3 |
Statistics table initialized. |
A statistical table that holds CPU usage was initialized because the time on the device was changed by set clock commandI will. [Action] None. |
||
01700502 |
E3 |
CPU overloaded. There is the possibility of software failure in responding to user command input or sending notification to SNMP agent. |
The response to a user-entered command might have failed or a notification to an SNMP agent might have failed. The CPU might be overloaded. [Action] If necessary, reenter command or retrieve MIB. |
||
01700503 |
E3 |
There is the possibility of software failure in responding to user command input or sending notification to SNMP agent. |
The response to a user-entered command might have failed or a notification to an SNMP agent might have failed. [Action] If necessary, reenter command or retrieve MIB. |
||
01900250 |
E3 |
Software started up. |
The software has started. This log data is collected in UTC time. [Action] None. |
||
01910201 |
E3 |
System started collecting new "error.log". |
The system has started collecting data into a new reference log. [Action] None. |
||
01910202 |
E3 |
System restarted by user operation. |
The system was restarted by a user operation. [Action] None. |
||
01910203 |
E3 |
System restarted after hardware reset. |
The system was restarted by the RESET button. [Action] None. |