3.5.5 Maximum number of static routing entries
The following table describes the maximum number of static routing entries that can be used as routing information for packets originating from the Switch. Note that the Switch can use only static routing and does not support routing protocols such as RIP and OSPF.
- <Structure of this section>
(1) IPv4 static routing entries
Model |
Item |
Maximum number of entries |
---|---|---|
All models |
IPv4 unicast route entries |
128 # |
#: Direct routes are not included.
(2) IPv6 static routing entries
Model |
Item |
Maximum number of entries |
---|---|---|
All models |
IPv6 unicast route entries |
64 # |
#: Direct routes are not included.