4.2 ChGr
メッセージ種別ChGrのシステムメッセージを次の表に示します。
メッセージ 識別子 |
イベント レベル |
メッセージテキスト |
---|---|---|
内容と対応 |
||
20120002 |
S6 |
The status of channel group is Up. |
チャネルグループをUPにしました。 [対応] なし。 |
||
20120003 |
S5 |
The channel group is Down because all ports were detached. |
チャネルグループ内のすべてのポートが離脱したためチャネルグループをDOWNにしました。 [対応] なし。 |
||
20120004 |
S5 |
The channel group is Down because the number of detached ports exceeded the configured number. |
チャネルグループ内の離脱ポート数が設定された制限値を超えたため,チャネルグループをDOWNにしました。 [対応] 相手装置との回線の接続状態を確認してください。 |
||
20120005 |
S6 |
A command disabled the channel group. |
チャネルグループ内shutdownコンフィグレーションによってチャネルグループを運用停止にしました。 [対応] なし。 |
||
20120006 |
S6 |
A command enabled the channel group. |
チャネルグループ内no shutdownコンフィグレーションによってチャネルグループの運用停止を解除しました。 [対応] なし。 |
||
20120007 |
S5 |
The port was detached from the channel group because different partner system ID were detected. (NIF/port = <nif no.>/<port no.>) |
LACPモードのリンクアグリゲーションで,相手装置のSystem IDがポート間で一致しなかったためチャネルグループから離脱しました。
[対応] 相手装置と正しく接続していること,および相手装置のSystem IDが正しいことを確認してください。 |
||
20120008 |
S5 |
The port was detached from the channel group because the partner key do not match. (NIF/port = <nif no.>/<port no.>) |
LACPモードのリンクアグリゲーションで,相手装置のKeyがポート間で一致しなかったためチャネルグループから離脱しました。
[対応] 相手装置と正しく接続していること,および相手装置のKeyが正しいことを確認してください。 |
||
20120009 |
S6 |
The port was removed from the channel group. (NIF/port = <nif no.>/<port no.>) |
コンフィグレーションのリンク削除によってチャネルグループから離脱しました。
[対応] なし。 |
||
20120010 |
S5 |
The port was detached from the channel group because the port status is Down. (NIF/port = <nif no.>/<port no.>) |
回線がDOWN状態になったためチャネルグループから離脱しました。
[対応] 物理的な断線など,回線の接続状態を確認してください。 |
||
20120011 |
S5 |
The port was detached from the channel group because other ports have faster data speeds. (NIF/port = <nif no.>/<port no.>) |
速度の異なる回線がチャネルグループ内に存在したため,速度の遅い回線をチャネルグループから離脱しました。
[対応] 本装置および相手装置で,物理的な断線など,回線の接続状態や回線速度を確認してください。 |
||
20120012 |
S5 |
The port was detached from the channel group because the port is half duplex. (NIF/port = <nif no.>/<port no.>) |
半二重で動作中の回線をチャネルグループから離脱しました。
[対応] 本装置および相手装置で,物理的な断線など,回線の接続状態を確認してください。 |
||
20120013 |
S5 |
The port was detached from the channel group because connection was denied by the LACP partner. (NIF/port = <nif no.>/<port no.>) |
LACPモードのリンクアグリゲーションで,LACPによって相手装置から接続拒否されたためチャネルグループから離脱しました。
[対応] 相手装置の状態を確認してください。 |
||
20120014 |
S5 |
The port was detached from the channel group because of an LACPDU timeout. (NIF/port = <nif no.>/<port no.>) |
LACPモードのリンクアグリゲーションで,相手装置からのLACPDUを受信しないでタイムアウトしたためチャネルグループから離脱しました。
[対応] 相手装置の状態を確認してください。 |
||
20120015 |
S6 |
The port was detached from the channel group because of a configuration change. (NIF/port = <nif no.>/<port no.>) |
コンフィグレーションが変更されたためチャネルグループから離脱しました。
[対応] なし。 |
||
20120016 |
S5 |
The port was detached from the channel group because the port was moved. (NIF/port = <nif no.>/<port no.>) |
チャネルグループ内でポートが移動したため,チャネルグループから離脱しました。
[対応] なし。 |
||
20120017 |
S5 |
The port was detached from the channel group because the partner aggregation bit is FALSE. (NIF/port = <nif no.>/<port no.>) |
LACPモードで相手装置のアグリゲーションビットがFALSEのため,チャネルグループから離脱しました。
[対応] なし。 |
||
20120018 |
S5 |
The port was detached from the channel group because the partner port number was changed. (NIF/port = <nif no.>/<port no.>) |
相手装置のポート番号が変更されたため,チャネルグループから離脱しました。
[対応] なし。 |
||
20120019 |
S5 |
The port was detached from the channel group because the partner port priority was changed. (NIF/port = <nif no.>/<port no.>) |
相手装置のポート優先度が変更されたため,チャネルグループから離脱しました。
[対応] なし。 |
||
20120020 |
S5 |
The port was detached from the channel group because of a detach port limit operation. (NIF/port = <nif no.>/<port no.>) |
離脱ポート数制限によってチャネルグループから離脱しました。
[対応] なし。 |
||
20120021 |
S6 |
The port was added to the channel group. (NIF/port = <nif no.>/<port no.>) |
チャネルグループにポートを追加しました。
[対応] なし。 |
||
20120022 |
S6 |
The port was attached to the channel group. (NIF/port = <nif no.>/<port no.>) |
チャネルグループにポートを集約しました。
[対応] なし。 |
||
20120023 |
S6 |
The standby port became active. (NIF/port = <nif no.>/<port no.>) |
スタンバイリンクによる運転を開始しました。
[対応] なし。 |
||
20120024 |
S6 |
The port detached from the channel group became the standby port. (NIF/port = <nif no.>/<port no.>) |
スタンバイリンクによる運転を停止しました。
[対応] なし。 |
||
20120025 |
S6 |
The port cannot attach because of non-revertive function. (NIF/port = <nif no.>/<port no.>) |
切り戻し抑止機能が動作したためポートを集約しませんでした。
[対応] 回線を集約する場合はclear channel-group non-revertiveコマンドを実行してください。 |