運用コマンドレファレンス Vol.2
[機能]
Static LSP統計情報の0クリアを行います。
[入力モード]
一般ユーザモードおよび装置管理者モード
[入力形式]
clear mpls static-lsp repair-statistics [{global-repair [{send [<Repair Send ID>] | receive [<Group ID> ]}] | [lsp [{<Ingress LSP ID> | < Core LSP ID >}]]}]
[パラメータ]
- repair-statistics
- 統計カウンタを指定します。
- global-repair
- Global Repair機能の統計カウンタを対象とします。
- send
- 障害通知送信の統計カウンタを対象とします。
- <Repair Send ID>
- 指定した障害通知送信番号の障害通知送信の統計カウンタを対象とします。指定可能な値の範囲は1〜1024です。
- receive
- 障害通知受信の統計カウンタを対象とします。
- <Group ID>
- 指定したグループの障害通知受信の統計カウンタを対象とします。指定可能な値の範囲は1〜65535です。
- lsp
- lsp機能の統計カウンタを対象とします。
- <Ingress LSP ID >
- 指定したIngress LSPを対象とします。指定可能な値の範囲は1〜10000です。
- < Core LSP ID >
- 指定したCore LSPを対象とします。指定可能な値の範囲は1〜10000です。
[実行例]
Static LSP統計情報を初期化します。
図8-20 Static LSP統計情報の0クリア
> show mpls static-lsp repair-statistics Total : 2 Repair Send ID : 1 Watch Interface Name : POS-1 Description : toOsaka Status : up Status Change Time : 2005/11/22 20:56:13 Send Repair Packets : 0 Repair Count : 0 Repair Send ID : 1024 Watch Interface Name : Ether-1 Description : - Status : down Status Change Time : 2005/11/22 20:47:05 Send Repair Packets : 0 Repair Count : 1 Total : 3 Group ID : 100 Description : - Repair Status : primary Status Change Time : 2005/11/22 21:09:55 Global Repair : manually Global Repair From : - Receive Repair Packets : 0 Failed(to primary) : 0 Failed(to secondary) : 0 Group ID : 200 Description : - Repair Status : primary Status Change Time : 2005/11/22 20:55:04 Global Repair : - Global Repair From : - Receive Repair Packets : 0 Failed(to primary) : 0 Failed(to secondary) : 0 Group ID : 1000 Description : toFukuoka Repair Status : primary Status Change Time : 2005/11/22 21:09:57 Global Repair : manually Global Repair From : - Receive Repair Packets : 0 Failed(to primary) : 0 Failed(to secondary) : 0 Total : 4 Static LSP ID : 1 Description : toTokyo LSP type : routing-based fec : 200.200.0.0/24 Status : primary Status Change Time : 2005/11/22 21:09:55 Count(to primary) : 2 Count(to secondary) : 2 Failed(to primary) : 0 Failed(to secondary): 0 Static LSP ID : 2 Description : - LSP type : policy-based fec : - Status : primary Status Change Time : 2005/11/22 21:09:55 Count(to primary) : 1 Count(to secondary) : 1 Failed(to primary) : 0 Failed(to secondary): 0 Static LSP ID : 3 Description : - LSP type : routing-based fec : 100.100.100.0/24 Status : secondary Status Change Time : 2005/11/22 20:49:48 Count(to primary) : 0 Count(to secondary) : 0 Failed(to primary) : 0 Failed(to secondary): 0 Static LSP ID : 10000 Description : - LSP type : - fec : - Status : primary Status Change Time : 2005/11/22 20:56:59 Count(to primary) : 1 Count(to secondary) : 1 Failed(to primary) : 0 Failed(to secondary): 0 > clear mpls static-lsp repair-statistics > show mpls static-lsp repair-statistics Total : 2 Repair Send ID : 1 Watch Interface Name : POS-1 Description : toOsaka Status : up Status Change Time : 2005/11/22 20:56:13 Send Repair Packets : 0 Repair Count : 0 Repair Send ID : 1024 Watch Interface Name : Ether-1 Description : - Status : down Status Change Time : 2005/11/22 20:47:05 Send Repair Packets : 0 Repair Count : 0 Total : 3 Group ID : 100 Description : - Repair Status : primary Status Change Time : 2005/11/22 21:09:55 Global Repair : manually Global Repair From : - Receive Repair Packets : 0 Failed(to primary) : 0 Failed(to secondary) : 0 Group ID : 200 Description : - Repair Status : primary Status Change Time : 2005/11/22 20:55:04 Global Repair : - Global Repair From : - Receive Repair Packets : 0 Failed(to primary) : 0 Failed(to secondary) : 0 Group ID : 1000 Description : toFukuoka Repair Status : primary Status Change Time : 2005/11/22 21:09:57 Global Repair : manually Global Repair From : - Receive Repair Packets : 0 Failed(to primary) : 0 Failed(to secondary) : 0 Total : 4 Static LSP ID : 1 Description : toTokyo LSP type : routing-based fec : 200.200.0.0/24 Status : primary Status Change Time : 2005/11/22 21:09:55 Count(to primary) : 0 Count(to secondary) : 0 Failed(to primary) : 0 Failed(to secondary): 0 Static LSP ID : 2 Description : - LSP type : policy-based fec : - Status : primary Status Change Time : 2005/11/22 21:09:55 Count(to primary) : 0 Count(to secondary) : 0 Failed(to primary) : 0 Failed(to secondary): 0 Static LSP ID : 3 Description : - LSP type : routing-based fec : 100.100.100.0/24 Status : secondary Status Change Time : 2005/11/22 20:49:48 Count(to primary) : 0 Count(to secondary) : 0 Failed(to primary) : 0 Failed(to secondary): 0 Static LSP ID : 10000 Description : - LSP type : - fec : - Status : primary Status Change Time : 2005/11/22 20:56:59 Count(to primary) : 0 Count(to secondary) : 0 Failed(to primary) : 0 Failed(to secondary): 0
[表示説明]
なし
[ユーザ通信への影響]
なし
[応答メッセージ]
表8-28 clear mpls static-lspコマンド応答メッセージ
メッセージ内容 意味 Connection failed to MPLS. MPLSプログラムとの通信が失敗しました。コマンドを再投入してください。頻発する場合は,restart mplsコマンド(「restart mpls【OP-MPLS】」参照)でMPLSプログラムを再起動してください。 Can't execute MPLS program is initializing. MPLSプログラムが初期設定処理中のためコマンドを受け付けられません。しばらくして再投入してください。 MPLS is not active. MPLSプログラムが動作していません。MPLSの動作条件およびコンフィグレーションを確認してください。 MPLS is configured to be disabled. コンフィグレーション中でnoの設定がされています。コンフィグレーションを確認してください。 MPLS is suppressing. MPLSが終了処理中です。コンフィグレーションを確認してください。 No such Repair Send ID. 指定Repair Send IDは見つかりません。 No such Group ID. 指定グループ番号は見つかりません。 No such LSP ID. 指定LSP IDは見つかりません。 Can't execute this command in standby BCU. 待機系BCUでこのコマンドは実行できません。
[注意事項]
なし
Copyright (c) 2005, 2011, ALAXALA Networks Corporation. All rights reserved.