コンフィグレーションガイド Vol.2


9.2.2 Web認証の設定情報表示

show web-authenticationコマンドでWeb認証の設定情報が表示されます。

〈この項の構成〉

(1) 固定VLANモードで,認証方式がRADIUS認証の場合

図9‒11 Web認証の設定情報表示(固定VLANモードのRADIUS認証)
# show web-authentication
Date 20XX/10/17 10:52:49 UTC
web-authentication Information:
   Authentic-mode   : Static-VLAN
   Authentic-method : RADIUS        Accounting-state : disable
   Dead-interval    : 10
          Max-timer : 60                   Max-user  : 256
         VLAN Count : -                  Auto-logout : -
   Syslog-send      : enable
   Alive-detection  : enable
              timer : 60    interval-timer : 3     count : 3
   URL-redirect     : enable    Protocol : http
   Jump-URL         : http://www.example.com/
   Web-IP-address   : 10.10.10.1
   FQDN             : aaa.example.com
   Web-port         : http  : 80, 8080       https : 443, 8443
   ARP-relay Port   : 0/1-2
   Force-Authorized : disable
   Auth-max-user    : 1024
 
         Port          :    0/1
         VLAN ID       :    5,10,15
         Access-list-No:    100
         Max-user      :    64
 
         Port          :    0/2
         VLAN ID       :    15-16
         Access-list-No:    100
         Max-user      :    64

(2) ダイナミックVLANモードで,認証方式がローカル認証の場合

図9‒12 Web認証の設定情報表示(ダイナミックVLANモードのローカル認証)
# show web-authentication
Date 20XX/10/17 10:52:49 UTC
web-authentication Information:
   Authentic-mode   : Dynamic-VLAN
   Authentic-method : Local         Accounting-state : disable
   Dead-interval    : 10
          Max-timer : 60                   Max-user  : 256
         VLAN Count : -                  Auto-logout : disable
   Syslog-send      : enable
   URL-redirect     : enable    Protocol : http
   Jump-URL         : http://www.example.com/
   Web-IP-address   : 192.168.1.1
   FQDN             : aaa.example.com
   Web-port         : http  : 80, 8080       https : 443, 8443
   ARP-relay Port   : 0/10,12
   Force-Authorized : enable
   Auth-max-user    : 1024
 
         Port          :    0/10
         VLAN ID       :    1000,1500
         Native VLAN   :    10
         Forceauth VLAN:    1000
         Access-list-No:    100
         Max-user      :    64
 
         Port          :    0/12
         VLAN ID       :    1000,1500
         Native VLAN   :    10
         Forceauth VLAN:    1000
         Access-list-No:    100
         Max-user      :    64

(3) ダイナミックVLANモードで,認証方式がRADIUS認証の場合

図9‒13 Web認証の設定情報表示(ダイナミックVLANモードのRADIUS認証)
# show web-authentication
Date 20XX/10/17 10:52:49 UTC
web-authentication Information:
   Authentic-mode   : Dynamic-VLAN
   Authentic-method : RADIUS        Accounting-state : enable
   Dead-interval    : 10
          Max-timer : 60                   Max-user  : 256
         VLAN Count : -                  Auto-logout : disable
   Syslog-send      : enable
   URL-redirect     : enable    Protocol : http
   Jump-URL         : http://www.example.com/
   Web-IP-address   : 192.168.1.1
   FQDN             : aaa.example.com
   Web-port         : http  : 80, 8080       https : 443, 8443
   ARP-relay Port   : 0/10,12
   Force-Authorized : enable
   Auth-max-user    : 1024
 
         Port          :    0/10
         VLAN ID       :    1000,1500
         Native VLAN   :    10
         Forceauth VLAN:    1000
         Access-list-No:    100
         Max-user      :    256
 
         Port          :    0/12
         VLAN ID       :    1000,1500
         Native VLAN   :    10
         Forceauth VLAN:    -
         Access-list-No:    100
         Max-user      :    256

(4) レガシーモードでVLANが登録されていて,認証方式がローカル認証の場合

図9‒14 Web認証の設定情報表示(ローカル認証)
# show web-authentication
Date 20XX/10/17 10:52:49 UTC
web-authentication Information:
   Authentic-mode   : Legacy
   Authentic-method : Local         Accounting-state : disable
          Max-timer : 60                   Max-user  : 256
         VLAN Count : 16                 Auto-logout : disable
   Syslog-send      : enable 
   Jump-URL         : http://www.example.com/
   Web-port         : http  : 80             https : 443
 
VLAN Information:
            VLAN ID :    5,10,15,20,25,30,35,40,1000-1007

(5) レガシーモードでVLANが登録されていて,認証方式がRADIUS認証の場合

図9‒15 Web認証の設定情報表示(RADIUS認証)
# show web-authentication
Date 20XX/10/17 10:52:49 UTC
web-authentication Information:
   Authentic-mode   : Legacy
   Authentic-method : RADIUS        Accounting-state : disable
          Max-timer : 60                   Max-user  : 256
         VLAN Count : 16                 Auto-logout : disable
   Syslog-send      : enable 
   Jump-URL         : http://www.example.com/
   Web-port         : http  : 80             https : 443
 
VLAN Information:
            VLAN ID :    5,10,15,20,25,30,35,40,1000-1007