コンフィグレーションガイド Vol.3

[目次][索引][前へ][次へ]


12.2.6 学習用経路フィルタの設定

[設定のポイント]
学習したBGP4経路の優先度を設定する場合,route-mapを使用し,条件と設定値を指定します。

[コマンドによる設定]
  1. (config)# ip prefix-list EXT_IN seq 10 permit 10.10.0.0/16
    (config)# route-map SET_LOCPREF_IN permit 10
    (config-route-map)# match ip address prefix-list EXT_IN
    (config-route-map)# set local-preference 120
    (config-route-map)# exit
    (config)# route-map SET_LOCPREF_IN permit 20
    (config-route-map)# exit
    宛先ネットワークが10.10.0.0/16のLOCAL_PREF属性値に120を設定します。
     
  2. (config)# ip as-path access-list 10 permit "_65529$"
    (config)# route-map SET_ASPREPEND_IN permit 10
    (config-route-map)# match as-path 10
    (config-route-map)# set as-path prepend count 1
    (config-route-map)# exit
    (config)# route-map SET_ASPREPEND_IN permit 20
    (config-route-map)# exit
    AS_PATH属性のAS配列の最終が65529の場合にAS配列のAS数を1個追加
    します。
     
  3. (config)# ip prefix-list INT_IN_1 seq 10 permit 172.20.0.0/16
    (config)# route-map SET_ORIGIN_IN permit 10
    (config-route-map)# match ip address prefix-list INT_IN_1
    (config-route-map)# set origin incomplete
    (config-route-map)# exit
    (config)# route-map SET_ORIGIN_IN permit 20
    (config-route-map)# exit
    宛先ネットワークが172.20.0.0/16の場合,ORIGIN属性にINCOMPLETEを設定します。
     
  4. (config)# ip prefix-list INT_IN_2 seq 10 permit 172.30.0.0/16
    (config)# route-map SET_MED_IN permit 10
    (config-route-map)# match ip address prefix-list INT_IN_2
    (config-route-map)# set metric 100
    (config-route-map)# exit
    (config)# route-map SET_MED_IN permit 20
    (config-route-map)# exit
    宛先ネットワークが172.30.0.0/16の場合,MED属性値に100を設定します。
     

[目次][前へ][次へ]


[他社商品名称に関する表示]

All Rights Reserved, Copyright(C), 2005, 2012, ALAXALA Networks, Corp.