コンフィグレーションコマンドレファレンス
表44-25 GSRPのエラーメッセージ
メッセージ 内容 can not configure gsrp when spanning-tree is configured. スパニングツリーの設定があるため,GSRPが設定できません。 gsrp-<gsrp group id>: can not specify both any flush methods and direct-link on the channel-group <channel group number>. ダイレクトリンクに設定したチャネルグループにreset-flush-portまたはno-flush-portを指定できません。
該当の設定からチャネルグループを削除するか別のチャネルグループを使用してください。<gsrp group id>:GSRPグループID
<channel group number>:チャネルグループ番号gsrp-<gsrp group id>: can not specify both any flush methods and direct-link on the port <nif no.>/<port no.>. ダイレクトリンクに設定したポートにreset-flush-portまたはno-flush-portを指定できません。
該当の設定からポートを削除するか別のポートを使用してください。<gsrp group id>:GSRPグループID
<nif no.>/<port no.>:NIF番号/ポート番号gsrp-<gsrp group id>:can not specify the two or more flush methods on the channel-group <channel group number>. 同一チャネルグループに二つ以上のフラッシュ方法は指定できません。
該当の設定からチャネルグループを削除するか別のチャネルグループを使用してください。<gsrp group id>:GSRPグループID
<channel group number>:チャネルグループ番号gsrp-<gsrp group id>:can not specify the two or more flush methods on the port <nif no.>/<port no.>. 同一ポートに二つ以上のフラッシュ方法は指定できません。
該当の設定からポートを削除するか別のポートを使用してください。<gsrp group id>:GSRPグループID
<nif no.>/<port no.>:NIF番号/ポート番号gsrp-<gsrp group id>-<vlan group id>: vlan <vlan id> has been configured in another vlan-group. 指定されたVLANはすでにほかのVLANグループに設定されています。
ほかのVLANグループから削除するか,別のVLANを使用してください。<gsrp group id>:GSRPグループID
<vlan group id>:VLANグループID
<vlan id>:VLAN ID
Copyright (c)2005, 2011, ALAXALA Networks Corporation. All rights reserved.