1.1.2 Message type
Message types are information that categorize operation messages, user command operations, configuration error messages, command response messages, and other messages according to their content. Operation messages can be classified according to the format of the information to be output. The following table lists the message types.
|
Message type |
Description |
Categorization by type of operational message |
|---|---|---|
|
KEY |
Command operations entered from the operation terminal |
- |
|
RSP |
Messages output by switches to respond to entered commands. |
- |
|
SKY |
Input command information by script |
- |
|
SRS |
Messages that the device outputs to scripted input commands |
- |
|
ERR |
Failure information for each event location on the switch |
Event location format |
|
EVT |
Event information for each event location on the switch |
|
|
AUT |
The information that is collected with the Layer 2 authentication functions for each program. Indicated as corresponding operation commands.
|
Operation Log Message Format |
|
DSN |
Information to be collected with DHCP snooping. Indicated as corresponding operation commands.
|
|
|
TRO |
Tracking Object Log [SL-L3A] |
Message text format |
|
RTM |
IPv4 or IPv6 routing information |
|
|
MRP |
IPv4 multicast routing information |
|
|
MR6 |
IPv6 multicast routing information |
|
|
BFD |
BFD info |
Legend:-: Not applicable