1.1.1 Message Type
The table below describes the types of output messages and gives references for those messages. Among the types of messages, information about the switches and functions output by the Switch is called an operation message.
Message type |
Reference |
|
---|---|---|
Configuration Error Messages |
Error Messages on Configuration Editing in the manual Configuration Command Reference |
|
Command response messages |
Response Messages section of each command in the manual Operation Command Reference |
|
Operation message |
Event location format |
[2 Event location format |
Operation Log Message Format |
Operation log messages for the following commands in the operation command reference
|
|
Message text format |
[3 "Message text format" |