33.1.2 IPv6 multicast filtering methods
For details about IPv6 multicast filtering, see section 30.1.2, Filtering Methods.
The following tables show the operation of the configuration commands for IPv6 multicast filtering.
Configuration commands |
Description |
---|---|
ipv6 prefix-list |
This command is not supported. If it is specified, it is ignored. |
ipv6 access-list |
Use only permit. IP addressing with deny specified is ignored. |
route-map |
Use only permit. Route-map with deny is ignored. |
ip as-path access-list |
This command is not supported. If it is specified, it is ignored. |
ip community-list standard |
This command is not supported. If it is specified, it is ignored. |
ip community-list extended |
This command is not supported. If it is specified, it is ignored. |