30.3.1 Checking the routes received by RIPng (before learned route filtering)
To check routes received by the RIPng, use the show ipv6 rip operation command with the received-routes parameter specified.
> show ipv6 rip received-routes Date 20XX/07/14 12:00:00 UTC Status Codes: * valid, > active, r RIB failure Neighbor Address: fe80::200:87ff:fe28:90d7%VLAN0007 Destination Next Hop Interface Metric Tag Timer *> 3ffe:3b01:6705:1::/64 fe80::200:87ff:fe28:90d7%VLAN0007 VLAN0007 1 0 5s |
- Notes
-
The command output does not include routes that are excluded by learned route filtering or do not have priority under RIPng.