27.5.2 Verifying the Domain

While OSPFv3 is active, you can use the show ipv6 ospf operation command to check relevant settings such as router IDs and distances.

Figure 27-6: Result of executing show ipv6 ospf command
>show ipv6 ospf Date 20XX/07/14 12:00:00 UTC OSPFv3 protocol: ON Domain: 1 Router ID: 172.16.1.1 Distance: Intra Area: 10, Inter Area: 10, External: 150 Flags: <AreaBorder ASBoundary> SPF Interval: 7s, SPF Delay: 3s Area: 1, Interfaces: 1 Network Range State - -

Figure 27-6: Result of executing show ipv6 ospf command

>show ipv6 ospf
Date 20XX/07/14 12:00:00 UTC
OSPFv3 protocol: ON
 
Domain: 1
Router ID: 172.16.1.1
Distance:
  Intra Area: 10, Inter Area: 10, External: 150
Flags: <AreaBorder ASBoundary>
SPF Interval: 7s, SPF Delay: 3s
Area: 1, Interfaces: 1
    Network Range                                 State
    -                                             -