22.2.1 List of configuration commands
The following tables list the commands used to configure IPv6 DHCP relay.
|
Command name |
Description |
|---|---|
|
ipv6 dhcp relay destination |
Specifies the relay destination of IPv6 DHCP packets. |
|
ipv6 dhcp relay hop-limit |
Specifies the maximum hop count for relayed IPv6 DHCP packets. |
|
ipv6 dhcp relay static-route-setting |
Automatically adds a distributed prefix to the routing information table of the Switch by specifying the routing information option of an IPv6 DHCP relay. |
|
service ipv6 dhcp relay |
Enables or disables IPv6 DHCP relaying. |