17.1.2 IPv4 multicast filtering methods
For details about IPv4 multicast filtering, see 14.1.2 Filtering methods.
The following tables show the operation of the configuration commands for IPv4 multicast filtering.
|
Configuration commands |
Description |
|---|---|
|
ip prefix-list |
This command is not supported. If it is specified, it is ignored. |
|
ip access-list standard |
Use only permit. IP addressing with deny specified is ignored. |
|
ip access-listt extended |
This command is not supported. If it is specified, it is ignored. |
|
route-map |
Use only permit. Route-map with deny is ignored. |
|
ip as-path access-list |
This command is not supported. If it is specified, it is ignored. |
|
ip community-list standard |
This command is not supported. If it is specified, it is ignored. |
|
ip community-list extended |
This command is not supported. If it is specified, it is ignored. |