Configuration Guide Vol. 3


13.6.4 Verifying Support Feature Negotiation

<Structure of this section>

(1) List of operation commands

The following table lists the operation commands related to the negotiation of support functions.

Table 13-28: List of operation commands

Command name

Description

show ip bgp

Shows information related to the BGP4 protocol.

(2) Verifying Negotiation

To display the result of capability negotiation, use the show ip bgp operation command with the neighbors and detail parameters specified.

Figure 13-40: Result of executing show ip bgp command (specifying neighbors detail parameter)
> show ip bgp neighbors detail
Date 20XX/10/17 15:52:14 UTC
BGP Peer: 10.1.2.2       , Remote AS: 65531 
Remote Router ID: 10.1.2.102
    BGP Status: Established         HoldTime: 180  , Keepalive: 60
    Established Transitions: 1      Established Date: 20XX/10/17 15:51:00
    BGP Version: 4                  Type: Internal
    Local Address: 10.1.2.1         Local AS: 65531
    Local Router ID: 192.168.1.100
    Next Connect Retry: -           Connect Retry Timer: - 
    Last Keep Alive Sent: 15:52:00  Last Keep Alive Received: 15:52:00
    BGP Message  UpdateIn   UpdateOut  TotalIn    TotalOut
                 0          0          2          4
    BGP Capability Negotiation: <IPv4-Uni Refresh Refresh(v)>             ..1
      Send   : <IPv4-Uni Refresh Refresh(v)> 
      Receive: <IPv4-Uni Refresh Refresh(v)>
    Password: UnConfigured
    BFD Name: -, BFD ID: -, BFD State: -
BGP Peer: 192.168.2.2    , Remote AS: 65531
Remote Router ID: 192.168.1.102
    BGP Status: Established         HoldTime: 180  , Keepalive: 60
    Established Transitions: 1      Established Date: 20XX/10/17 15:50:43
    BGP Version: 4                  Type: Internal
    Local Address: 192.168.2.1      Local AS: 65531
    Local Router ID: 192.168.1.100
    Next Connect Retry: -           Connect Retry Timer: -
    Last Keep Alive Sent: 15:51:43  Last Keep Alive Received: 15:51:43
    BGP Message  UpdateIn   UpdateOut  TotalIn    TotalOut
                 0          0          2          4
    BGP Capability Negotiation: <IPv4-Uni Refresh>                        ..2
      Send   : <IPv4-Uni Refresh Refresh(v)>
      Receive: <IPv4-Uni Refresh >
    Password: UnConfigured
    BFD Name: -, BFD ID: -, BFD State: -
BGP Peer: 10.2.2.2       , Remote AS: 65533
Remote Router ID: 10.2.2.102
    BGP Status: Established         HoldTime: 180  , Keepalive: 60
    Established Transitions: 1      Established Date: 20XX/10/17 15:50:30
    BGP Version: 4                  Type: External
    Local Address: 10.1.2.1         Local AS: 65531
    Local Router ID: 192.168.1.100
    Next Connect Retry: -           Connect Retry Timer: -
    Last Keep Alive Sent: 15:51:30  Last Keep Alive Received: 15:51:30
    BGP Message  UpdateIn   UpdateOut  TotalIn    TotalOut
                 0          0          2          4
    BGP Capability Negotiation: <IPv4-Uni>                                ..3
      Send   : <IPv4-Uni Refresh Refresh(v)>
      Receive: <IPv4-Uni>
    Password: UnConfigured
    BFD Name: -, BFD ID: -, BFD State: -
BGP Peer: 172.16.2.2     , Remote AS: 65532
Remote Router ID: 172.16.1.102
    BGP Status: Established         HoldTime: 180  , Keepalive: 60
    Established Transitions: 1      Established Date: 20XX/10/17 15:49:35
    BGP Version: 4                  Type: External
    Local Address: 172.16.2.1       Local AS: 65531
    Local Router ID: 192.168.1.100
    Next Connect Retry: -           Connect Retry Timer: -
    Last Keep Alive Sent: 15:51:35  Last Keep Alive Received: 15:51:35
    BGP Message  UpdateIn   UpdateOut  TotalIn    TotalOut
                 0          0          3          5
    BGP Capability Negotiation: <>                                        ..4
      Send   : <IPv4-Uni Refresh Refresh(v)>
      Receive: <>
    Password: UnConfigured
    BFD Name: -, BFD ID: -, BFD State: -
>
  1. The following capabilities were successfully negotiated: IPv4-Uni: IPv4 unicast routing; Refresh: Route refresh capability (RFC 2918-compliant); and Refresh(v): Route refresh capability (Capability Code: 128).

  2. The following capabilities were successfully negotiated: IPv4-Uni: IPv4 unicast routing; and Refresh: Route refresh capability (RFC 2918-compliant).

  3. The following capability was successfully negotiated: IPv4-Uni: IPv4 unicast routing.

  4. Capabilities were not successfully negotiated.