5.2.1 List of configuration commands
The following table lists the commands used to configure DHCP/BOOTP relay agent.
Command name |
Description |
---|---|
ip bootp-hops |
Sets the threshold for the number of hops. |
ip helper-address |
Sets the address of the destination to which the DHCP relay agent forwards packets. [5.2.2 The settings in the basic configuration and 5.2.3 Settings in a multihomed configuration are used to set IP address of DHCP/BOOTP server as a helper address. |
ip relay-agent-address |
Sets the address of the relay agent interface to which a DHCP/BOOTP client connects (giaddr). [5.2.3 Settings in a multihomed configuration is used to set IP address of Network A as the relay agent address. |