26.3.2 Checking PTP status

<Structure of this section>

(1) Confirmation of configuration settings and operation status

(1) Confirmation of configuration settings and operation status

Use show ptp command to check PTP settings and operation status. Check whether PTP set by the configuration command has been applied correctly.

Figure 26-4: Result of executing show ptp command
> show ptp Date 20XX/09/01 12:00:00 UTC Clock types: E2E-TC PTP profile information Profile name: AlaxalA PTP profile for AX3660S Profile version: 1.0 Profile identifier: 0012.e200.0100 Clock description Manufacturer identity: 00-12-E2 Product description: AlaxalA xxxxxxxxxxxxxxxx Revision data: 1.0;1.0;1.0 User description: E2E-TC NODE 101 Profile identity: 0012.e200.0100 Transport mechanism protocol: IPv4 Source interface: VLAN 1000 (100.100.100.1) Primary domain: 0 Port counts: 4 Port Port Identity 1/0/1 0012.e2ff.fe00.0100:100 1/0/2 0012.e2ff.fe00.0100:101 1/0/10 0012.e2ff.fe00.0100:109 1/0/20 0012.e2ff.fe00.0100:119 >

Figure 26-4: Result of executing show ptp command

> show ptp
Date 20XX/09/01 12:00:00 UTC
Clock types: E2E-TC
PTP profile information
  Profile name: AlaxalA PTP profile for AX3660S
  Profile version: 1.0
  Profile identifier: 0012.e200.0100
Clock description
  Manufacturer identity: 00-12-E2
  Product description: AlaxalA xxxxxxxxxxxxxxxx
  Revision data: 1.0;1.0;1.0
  User description: E2E-TC NODE 101
  Profile identity: 0012.e200.0100
Transport mechanism protocol: IPv4
Source interface: VLAN 1000 (100.100.100.1)
Primary domain: 0
Port counts: 4
  Port      Port Identity
  1/0/1     0012.e2ff.fe00.0100:100
  1/0/2     0012.e2ff.fe00.0100:101
  1/0/10    0012.e2ff.fe00.0100:109
  1/0/20    0012.e2ff.fe00.0100:119
>