23.3.1 List of operation commands
The following tables list the operation commands for CFM.
|
Command name |
Description |
|---|---|
|
l2ping |
Executes the CFM loopback functionality and verifies the connectivity between the specified MPs. |
|
l2traceroute |
Executes the CFM linktrace functionality and verifies the routing between the specified MPs. |
|
show cfm |
Shows information about a CFM domain. |
|
show cfm remote-mep |
Shows information about a CFM remote MEP. |
|
show cfm fault |
Shows CFM failure information. |
|
show cfm l2traceroute-db |
Shows routing information obtained by using the l2traceroute command. |
|
show cfm statistics |
Shows CFM statistics. |
|
clear cfm remote-mep |
Clears remote information about a CFM MEP. |
|
clear cfm fault |
Clears CFM failure information. |
|
clear cfm l2traceroute-db |
Clears route information obtained by using the l2traceroute command. |
|
clear cfm statistics |
Clears CFM statistics. |
|
restart cfm |
Restarts the CFM program. |
|
dump protocols cfm |
Outputs CFM dump information to a file. |