Configuration Guide Vol. 2


9.2.4 Displaying the Authorization Status of Web authentication

You can use the show web-authentication login command to display the authentication status of users logged in using Web authentication.

<Structure of this section>

(1) For fixed VLAN

Figure 9-17: Authorization status of Web authentication (fixed VLAN)
# show web-authentication login
Date 20XX/10/17 10:52:49 UTC
Total user counts:2
F Username
  VLAN    MAC address      Port  IP address
  Login time               Limit time
  USER00123456789
     3    0012.e200.9166   0/5   192.168.0.1
  20XX/10/17 09:58:04 UTC  00:10:20
* USER01
  4094    0012.e268.7527   0/6   192.168.1.10
  20XX/10/17 10:10:23 UTC  00:20:35

(2) For dynamic VLAN

Figure 9-18: Web Authorization Status Indication (Dynamic VLAN)
# show web-authentication login
Date 20XX/10/17 10:52:49 UTC
Total user counts:2
F Username
  VLAN    MAC address      Login time               Limit time
  USER00123456789
     3    0012.e200.9166   20XX/10/17 09:58:04 UTC  00:10:20
* USER01
  4094    0012.e268.7527   20XX/10/17 10:10:23 UTC  00:20:35

(3) For legacy mode

Figure 9-19: Web Authorization Status Indication (Legacy Mode)
# show web-authentication login
Date 20XX/10/17 10:52:49 UTC
Total user counts:2
Username
VLAN    MAC address      Login time               Limit time
USER00123456789
   3    0012.e200.9166   20XX/10/17 09:58:04 UTC  00:10:20
USER01
4094    0012.e268.7527   20XX/10/17 10:10:23 UTC  00:20:35