9.2.2 View Web credentials settings
You can use the show web-authentication command to display the Web authentication configuration.
- <Structure of this section>
-
-
(1) When the authentication method is RADIUS in fixed VLAN mode
-
(2) Dynamic VLAN mode with local authentication as the authentication method
-
(3) In dynamic VLAN mode, the authentication method is RADIUS.
-
(4) If VLAN is registered in legacy mode and the authentication method is local authentication:
-
(5) When VLAN is registered in legacy mode and the authentication method is RADIUS authentication
-
(1) When the authentication method is RADIUS in fixed VLAN mode
# show web-authentication Date 20XX/10/17 10:52:49 UTC web-authentication Information: Authentic-mode : Static-VLAN Authentic-method : RADIUS Accounting-state : disable Dead-interval : 10 Max-timer : 60 Max-user : 256 VLAN Count : - Auto-logout : - Syslog-send : enable Alive-detection : enable timer : 60 interval-timer : 3 count : 3 URL-redirect : enable Protocol : http Jump-URL : http://www.example.com/ Web-IP-address : 10.10.10.1 FQDN : aaa.example.com Web-port : http : 80, 8080 https : 443, 8443 ARP-relay Port : 0/1-2 Force-Authorized : disable Auth-max-user : 1024 Port : 0/1 VLAN ID : 5,10,15 Access-list-No: 100 Max-user : 64 Port : 0/2 VLAN ID : 15-16 Access-list-No: 100 Max-user : 64 |
(2) Dynamic VLAN mode with local authentication as the authentication method
# show web-authentication Date 20XX/10/17 10:52:49 UTC web-authentication Information: Authentic-mode : Dynamic-VLAN Authentic-method : Local Accounting-state : disable Dead-interval : 10 Max-timer : 60 Max-user : 256 VLAN Count : - Auto-logout : disable Syslog-send : enable URL-redirect : enable Protocol : http Jump-URL : http://www.example.com/ Web-IP-address : 192.168.1.1 FQDN : aaa.example.com Web-port : http : 80, 8080 https : 443, 8443 ARP-relay Port : 0/10,12 Force-Authorized : enable Auth-max-user : 1024 Port : 0/10 VLAN ID : 1000,1500 Native VLAN : 10 Forceauth VLAN: 1000 Access-list-No: 100 Max-user : 64 Port : 0/12 VLAN ID : 1000,1500 Native VLAN : 10 Forceauth VLAN: 1000 Access-list-No: 100 Max-user : 64 |
(3) In dynamic VLAN mode, the authentication method is RADIUS.
# show web-authentication Date 20XX/10/17 10:52:49 UTC web-authentication Information: Authentic-mode : Dynamic-VLAN Authentic-method : RADIUS Accounting-state : enable Dead-interval : 10 Max-timer : 60 Max-user : 256 VLAN Count : - Auto-logout : disable Syslog-send : enable URL-redirect : enable Protocol : http Jump-URL : http://www.example.com/ Web-IP-address : 192.168.1.1 FQDN : aaa.example.com Web-port : http : 80, 8080 https : 443, 8443 ARP-relay Port : 0/10,12 Force-Authorized : enable Auth-max-user : 1024 Port : 0/10 VLAN ID : 1000,1500 Native VLAN : 10 Forceauth VLAN: 1000 Access-list-No: 100 Max-user : 256 Port : 0/12 VLAN ID : 1000,1500 Native VLAN : 10 Forceauth VLAN: - Access-list-No: 100 Max-user : 256 |
(4) If VLAN is registered in legacy mode and the authentication method is local authentication:
# show web-authentication Date 20XX/10/17 10:52:49 UTC web-authentication Information: Authentic-mode : Legacy Authentic-method : Local Accounting-state : disable Max-timer : 60 Max-user : 256 VLAN Count : 16 Auto-logout : disable Syslog-send : enable Jump-URL : http://www.example.com/ Web-port : http : 80 https : 443 VLAN Information: VLAN ID : 5,10,15,20,25,30,35,40,1000-1007 |
(5) When VLAN is registered in legacy mode and the authentication method is RADIUS authentication
# show web-authentication Date 20XX/10/17 10:52:49 UTC web-authentication Information: Authentic-mode : Legacy Authentic-method : RADIUS Accounting-state : disable Max-timer : 60 Max-user : 256 VLAN Count : 16 Auto-logout : disable Syslog-send : enable Jump-URL : http://www.example.com/ Web-port : http : 80 https : 443 VLAN Information: VLAN ID : 5,10,15,20,25,30,35,40,1000-1007 |