Description

Group switching function

• This subsection was added.

Grouping virtual routers

• This subsection was added.

Changing the Group Configuration

• This subsection was added.

Checking the configuration of a virtual router

• A description of the group switching function was added.

Receiving-side flow detection mode

• A custom was added to receive-side flow-detection mode.

Access lists

• A custom was added to receive-side flow-detection mode.

Receiving-side flow detection mode

• A custom was added to receive-side flow-detection mode.

QoS flow lists

• A custom was added to receive-side flow-detection mode.

Bandwidth monitoring

• A description based on the number of frames was added to the description of bandwidth monitoring.

• - A description of bandwidth monitoring (aggregate bandwidth monitoring) for multiple flows was added.

Bandwidth violation notification

• This subsection was added.

Setting of DSCP rewriting when minimum bandwidth monitoring is violated in units of frames

• The description was changed to support bandwidth monitoring by the number of frames.

Configuring aggregate bandwidth monitoring

• This subsection was added.

Configuring Bandwidth Violation Notification

• This subsection was added.

Checking DSCP rewriting when the minimum monitoring bandwidth is violated in units of frames

• The description was changed to support bandwidth monitoring by the number of frames.

Checking aggregate bandwidth monitoring

• This subsection was added.

Checking bandwidth violation notifications

• This subsection was added.

Terminal filtering

• A custom with dhcp-filter specified was added to the receive-side flow-detection mode, which is the usage condition for terminal filtering.

Sending-side flow detection mode

• The description of the flow-detection-mode layer3-mirror-1-out,layer3-mirror-2-out was deleted.

Policy-Based Mirroring Behavior Specifications

• The description of "Mirroring transmit frames" was deleted.

Configuring Policy-Based Mirroring

• Removed the description of "Setting to use transmission frame mirroring and filter operation together."

Notes on Using sFlow Statistics

• This subsection was added.

Supported specifications

• Among the supported status in uplink redundancy, the description of MAC address update when the active port is changed was changed during stacking.

Supported specifications

• A description of IEEE802.1 Organizationally Specific TLVs was added.

PTP

• This chapter was added.

Receiving-side flow detection mode

• A description of IP not set VLAN suppression was added.

Receiving-side flow detection mode

• A description of IP not set VLAN suppression was added.

Supported specifications

• A description of IEEE Std 802.1AB-2009 was added.

Operation of SSL certificates

• This section was added.

Preparing SSL Certificate

• This section was added.

Uplink Redundancy

• A description was added with support for uplink redundancy in a stacked configuration.

• Uplink redundant support for port reset functionality.

Port resetting

• This subsection was added.

Configuring port resetting

• This subsection was added.

802.1Q Tag assignment function

• This subsection was added.

Configuring port mirroring

• (5) Mirroring using 802.1Q Tag grant function was added.