20.4.1 List of operation commands
The following table lists the operation commands related to Ethernet.
Command name |
Description |
---|---|
show interfaces |
Displays Ethernet information. |
clear counters |
Clears the Ethernet statistics counters. |
show port |
Displays Ethernet information in list format. |
activate |
Changes the status of an Ethernet port from inactive to active. |
inactivate |
Changes the status of an Ethernet port from active to inactive. |
test interfaces |
Conducts a line test. |
no test interfaces |
Stops a line test, and displays the test results. |
show network-clock |
Displays the operating status of Sync-E. |