16.3.4 Applying or suppressing power saving schedules

You can use the set power-control schedule operation command to determine whether to apply power saving schedules during the scheduled time periods.

Figure 16-7: Applying a power saving schedule
> show power-control schedule XX1001 count 1 Date 20XX/10/01(Fri) 18:36:57 UTC Current Schedule Status : Enable(force disabled) Schedule Power Control Date: 20XX/10/01(Fri) 18:36 UTC - 20XX/10/02(Sat) 06:00 UTC

Figure 16-7: Applying a power saving schedule

> show power-control schedule XX1001 count 1
Date 20XX/10/01(Fri) 18:36:57 UTC
Current Schedule Status : Enable(force disabled)
Schedule Power Control Date:
  20XX/10/01(Fri) 18:36 UTC  -  20XX/10/02(Sat) 06:00 UTC

Check power control schedules. Enable(force disabled) indicates that the schedules are disabled.

> set power-control schedule enable

Enables power saving scheduling.

> show power-control schedule XX1001 count 1
Date 20XX/10/01(Fri) 18:37:20 UTC
Current Schedule Status : Enable
Schedule Power Control Date:
  20XX/10/01(Fri) 18:37 UTC  -  20XX/10/02(Sat) 06:00 UTC

Check power control schedules. Enable indicates that the schedules are enabled.