10.3.6 Configuring command accounting with TACACS + servers
- <Structure of this section>
(1) Sample Command Accounting Configuration with TACACS + Servers
- Points to note
-
The example below shows how to configure TACACS+ command accounting.
Before you begin, complete the setup on the TACACS+ server host to which the accounting records will be sent.
Command examples
-
(config)# tacacs-server host 192.168.10.1 key "TaC#001"
Configures the TACACS+ server as a prerequisite step.
-
(config)# aaa accounting commands 0-15 default start-stop group tacacs+
Configures command accounting.
- Notes
-
If you set aaa accounting commands without first executing the tacacs-server configuration command, the operation log entry System accounting failed will appear whenever the user enters a command. Make sure that you configure the destination TACACS+ server first.