2.3 FAN
This section describes the operation messages for the event location FAN.
Message ID |
Event Level |
Message text |
|
---|---|---|---|
Content and response |
|||
00000008 |
E7 |
<fan> speed is high. |
|
The fan is rotating at abnormally high speed. The <fan> part indicates the target fans. <fan> FAN3(1), FAN3(2) [Action] Replace the Switch. |
|||
R7 |
<fan> is normal. |
||
The fan is now in a normal state. The <fan> part indicates the target fans. <fan> FAN3(1), FAN3(2) [Action] None. |
|||
00000009 |
E7 |
<fan> stopped. |
|
Fan has stopped. The <fan> part indicates the target fans. <fan> FAN3(1), FAN3(2) [Action] Replace the Switch. |
|||
R7 |
<fan> is normal. |
||
The fan is now in a normal state. The <fan> part indicates the target fans. <fan> FAN3(1), FAN3(2) [Action] None. |