33.2.4 Configuring Multicast Router Ports

Points to note

When a multicast router is connected within a VLAN for which MLD snooping is set, specify the settings below for the VLAN interface configuration mode of the corresponding VLAN. This example shows a multicast router connected to a Gigabit Ethernet interface on port 1/0/1 of VLAN2.

Command examples

1. (config)# interface vlan 2

   (config-if)# ipv6 mld snooping mrouter interface gigabitethernet 1/0/1

   Switch to VLAN interface configuration mode of VLAN2 and specify 1/0/1 for the multicast router port.