25.2.1 Command list
The following tables list the configuration commands used to learn MAC addresses.
Command name |
Description |
---|---|
mac-address-table aging-time |
Sets the aging time for MAC address learning. |
mac-address-table learning |
Specify whether to enable or disable dynamic MAC addressing. |
mac-address-table static |
Sets a static entry. |
The following tables list the operation commands for MAC addressing.
Command name |
Description |
---|---|
show mac-address-table |
Shows information about the MAC address table. When learning-counter parameter is specified, the number of learned addresses for MAC address learning and the number of moves for MAC address learning are displayed for each port. |
clear mac-address-table |
Clears the MAC address table. |
show vlan # |
Displays MAC address-learning status of VLAN. |
- #
-
See "Operation Command Reference" and "24 VLAN".