2.10 MAC

20120002

E4

Channel Group(<channel group number>) is Up.

The channel group status is Up.

<channel group number>: Channel group number

[Action]

None.

20120003

E4

Channel Group(<channel group number>) is Down - All port detached.

All ports in the channel group are detached, and the channel group status is Down.

<channel group number>: Channel group number

[Action]

For line connection status with partner switches:

1. Check whether the line is down.

2. Check that the partner switch LACP setting and line statuses are normal.

20120004

E4

Channel Group(<channel group number>) is Down - The number of the detached port exceeded the configured number.

The number of detached ports in the channel group exceeds the set limit, and the channel group status is Down.

<channel group number>: Channel group number

[Action]

For line connection status with partner switches:

1. Check whether the line is down.

2. Check that the partner switch LACP setting and line statuses are normal.

20120005

E3

Channel Group(<channel group number>) disabled administratively.

A channel group was designated as disabled by the configuration.

<channel group number>: Channel group number

[Action]

None.

20120006

E3

Channel Group(<channel group number>) enabled administratively.

A channel group was released from the disabled state by the configuration.

<channel group number>: Channel group number

[Action]

None.

20120007

E3

Port(<switch no.>/<nif no.>/<port no.>) detached from Channel Group(<channel group number>) - Different Partner System ID is detected.

The system ID of a partner switch does not match between the ports for LACP mode link aggregation, and the port was detached from the channel group.

<switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number

<channel group number>: Channel group number

[Action]

Check the following:

1. Is the connection with the partner switch correct?

2. Is the system ID setting of the partner switch correct?

20120008

E3

Port(<switch no.>/<nif no.>/<port no.>) detached from Channel Group(<channel group number>) - Different Partner Key is detected.

The key of a partner switch does not match between the ports for LACP mode link aggregation, and the port was detached from the channel group.

<switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number

<channel group number>: Channel group number

[Action]

Check the following:

1. Is the connection with the partner switch correct?

2. Is the key setting of the partner switch correct?

20120009

E3

Port(<switch no.>/<nif no.>/<port no.>) removed from Channel Group(<channel group number>).

A port was detached from the channel group because of a configuration link deletion.

<switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number

<channel group number>: Channel group number

[Action]

None.

20120010

E3

Port(<switch no.>/<nif no.>/<port no.>) detached from Channel Group(<channel group number>) - Port down.

A line is down, and the port was detached from the channel group.

<switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number

<channel group number>: Channel group number

[Action]

Check the line status.

20120011

E3

Port(<switch no.>/<nif no.>/<port no.>) detached from Channel Group(<channel group number>) - Different Port data rate.

Lines that have different data rates (speeds) exist in the channel group. Lines that have low data rates were detached from the channel group.

<switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number

<channel group number>: Channel group number

[Action]

For detached lines, check the settings of the Switch and partner switches.

20120013

E3

Port(<switch no.>/<nif no.>/<port no.>) detached from Channel Group(<channel group number>) - Denied by the LACP partner.

In LACP mode link aggregation, a connection from the partner switch was denied due to LACP, and the port was detached from the channel group.

<switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number

<channel group number>: Channel group number

[Action]

Check the partner switch status.

20120014

E3

Port(<switch no.>/<nif no.>/<port no.>) detached from Channel Group(<channel group number>) - LACPDU timeout.

In LACP mode link aggregation, the port did not receive an LACPDU from the partner switch, and the port was detached from the channel group because of a timeout.

<switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number

<channel group number>: Channel group number

[Action]

Check the partner switch status, which is active.

20120015

E3

Port(<switch no.>/<nif no.>/<port no.>) detached from Channel Group(<channel group number>) - Configuration is changed.

A port was detached from the channel group because of a configuration change.

<switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number

<channel group number>: Channel group number

[Action]

None.

20120016

E3

Port(<switch no.>/<nif no.>/<port no.>) detached from Channel Group(<channel group number>) - Port moved is detected.

A port was detached from the channel group because the port was moved in the channel group.

<switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number

<channel group number>: Channel group number

[Action]

None.

20120017

E3

Port(<switch no.>/<nif no.>/<port no.>) detached from Channel Group(<channel group number>) - Partner Aggregation bit is FALSE.

The application bit of the partner switch in the LACP mode was false, and the port was detached from the channel group.

<switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number

<channel group number>: Channel group number

[Action]

None.

20120018

E3

Port(<switch no.>/<nif no.>/<port no.>) detached from Channel Group(<channel group number>) - Partner Port number is changed.

The port number of the partner switch was changed, and the port was detached from the channel group.

<switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number

<channel group number>: Channel group number

[Action]

None.

20120019

E3

Port(<switch no.>/<nif no.>/<port no.>) detached from Channel Group(<channel group number>) - Partner Port priority is changed.

The port priority value of the partner switch was changed, and the port was detached from the channel group.

<switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number

<channel group number>: Channel group number

[Action]

None.

20120020

E3

Port(<switch no.>/<nif no.>/<port no.>) detached from Channel Group(<channel group number>) - Operation of detach port limit.

A port was detached from the channel group because of a detach port limit.

<switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number

<channel group number>: Channel group number

[Action]

None.

20120021

E3

Port(<switch no.>/<nif no.>/<port no.>) added to Channel Group(<channel group number>).

A port was added to the channel group.

<switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number

<channel group number>: Channel group number

[Action]

None.

20120022

E3

Port(<switch no.>/<nif no.>/<port no.>) attached to Channel Group(<channel group number>).

A port was aggregated to the channel group.

<switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number

<channel group number>: Channel group number

[Action]

None.

20120023

E3

Port(<switch no.>/<nif no.>/<port no.>) attached to Channel Group(<channel group number>) - A standby port became active.

Operation by a standby link has started.

<switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number

<channel group number>: Channel group number

[Action]

None.

20120024

E3

Port(<switch no.>/<nif no.>/<port no.>) detached from Channel Group(<channel group number>) - This port became a standby port.

Operation by a standby link has started.

<switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number

<channel group number>: Channel group number

[Action]

None.