2.4.4 06XXXXXX-09XXXXXX

This section describes operation messages in which the two most significant digits of the message identifier are 06 to 09.

Table 2-7: Operation messages for event location SOFTWARE (06XXXXXX-)
Message ID	Event Level	Message text
Message ID	Content and response
06100001 06100002 06100004 06200001 06200002 06200004 06300001 06300002 06300004 06400001 06400002 06400004 06500001 06500002 06500004 09100001 09100002 09100004 09200001 09200002 09200004 09300001 09300002 09300004 09400001 09400002 09400004 09500001 09500002 09500004 09600001 09600002 09600004 09700001 09800001	E7	Software failure occurred during operation.
	An error occurred in the software during operation. [Action] Normal operation might not be possible. Take the following actions: Check the log by executing the show logging command. If another problem is indicated in the log, take appropriate action according to the error message. Use the reload command to restart the device. After you use the reload command to restart the system, if the same problem occurs, replace the device.
06100003 06200003 06300003 06400003 06500003 09100003 09200003 09300003 09400003 09500003 09600003	E9	System will restart due to software failure occurred during initialization.
	The Switch restarts because a software failure occurred during initialization. [Action] Check the log by executing the show logging command. If another problem is indicated in the log, take appropriate action according to the error message.
06100005 06200005 06300005 06400005 06500005 09100005 09200005 09300005 09400005 09500005 09600005 09700005 09800005	E9	System will restart due to software failure occurred during operation.
	The Switch is restarted because a software error occurred during operation. [Action] Check the log by executing the show logging command. If another problem is indicated in the log, take appropriate action according to the error message.