3.1.2 Flow detection conditions
To perform flow detection, specify the conditions for identifying the flow in the configuration. The following describes the flow detection conditions for the receiving-side interface.
- <Structure of this section>
(1) Flow detection condition of the receiving interface
The following table describes the flow detection conditions that can be specified for a receiving interface.
Type |
Configuration items |
|
---|---|---|
MAC conditions |
Configuration |
VLAN ID #1 |
MAC header |
Source MAC address |
|
Destination MAC address |
||
Ethernet type |
||
User priority #2 |
||
IPv4 conditions |
Configuration |
VLAN ID #1 |
MAC header |
User priority #2 |
|
IPv4 header #3 |
Upper-layer protocol |
|
Source IP address |
||
Destination IP address |
||
ToS |
||
DSCP |
||
Precedence |
||
IPv4-TCP header |
Source port number |
|
Destination port number |
||
TCP control flag #4 |
||
IPv4-UDP header |
Source port number |
|
Destination port number |
||
IPv4-ICMP header |
ICMP type value |
|
ICMP code value |
||
IPv6 conditions |
Configuration |
VLAN ID #1 |
MAC header |
User priority #2 |
|
IPv6 header #5 |
Upper-layer protocol |
|
Source IP address |
||
Destination IP address |
||
Traffic class |
||
DSCP |
||
IPv6-TCP header |
Source port number |
|
Destination port number |
||
TCP control flag #4 |
||
IPv6-UDP header |
Source port number |
|
Destination port number |
||
IPv6-ICMP header |
ICMP type value |
|
ICMP code value |