11.2.3 Configuring DNS
- <Structure of this section>
(1) Configuring DNS Resolvers
- Points to note
-
The example below shows how to set the domain name to be used by the DNS resolver, and the name server that the DNS resolver looks up. Because the DNS resolver functionality is enabled by default, it works as soon as the name server has been set.
Command examples
-
(config)# ip domain name router.example.com
Set the domain name as router.example.com.
-
(config)# ip name-server 192.168.0.1
Set the name server as 192.168.0.1.
(2) Disabling DNS Resolver Function
- Points to note
-
Disable the DNS resolver functionality.
Command examples
-
(config)# no ip domain lookup
Disable the DNS resolver functionality.