dump protocols ip-dhcp relay
DHCP/BOOTPリレーエージェントプログラムで採取している制御情報をファイルへ出力します。
[入力形式]
dump protocols ip-dhcp relay
[入力モード]
一般ユーザモードおよび装置管理者モード
[パラメータ]
なし
[実行例]
>dump protocols ip-dhcp relay > |
[表示説明]
なし
[通信への影響]
なし
[応答メッセージ]
メッセージ |
内容 |
---|---|
Another user is executing the 'dump protocols ip-dhcp relay' command. Wait a while, and then try again. |
ほかのユーザがコマンドを実行中です。しばらくしてから再実行してください。 |
The command cannot be executed because the DHCP/BOOTP relay agent program is not running. |
DHCP/BOOTPリレーエージェントプログラムが起動していないため,コマンドは実行できません。 |
The command cannot be executed. Try again. |
コマンドを実行できません。再実行してください。 |
The command is not authorized by the RADIUS/TACACS+ server or the configuration. |
このコマンドはRADIUSサーバ,TACACS+サーバ,またはコンフィグレーションで承認されていません。 |
[注意事項]
-
指定ファイルがすでに存在する場合は無条件で上書きするため,必要に応じてファイルをあらかじめバックアップしておいてください。出力先およびファイル名は次のとおりです。
-
ディレクトリ:/usr/var/dhcp/
-
ファイル名:dhcpd.dmp
-