show flash
装置内蔵フラッシュメモリの使用状態を表示します。
[入力形式]
show flash
[入力モード]
一般ユーザモードおよび装置管理者モード
[パラメータ]
なし
[実行例]
> show flash Date 20XX/04/01 07:09:21 UTC Warning threshold : 1000MB Recovery threshold: 1256MB Flash monitor event level: S6 BCU1 Flash: enabled area used free total user 185,394KB 2,832,550KB 3,017,944KB config 1,682KB 1,601,538KB 1,603,220KB dump0 2,816KB 326,416KB 329,232KB dump1 998KB 1,064,674KB 1,065,672KB log 11KB 137,207KB 137,218KB total 190,901KB 5,962,385KB 6,153,286KB BCU2 Flash: enabled area used free total user 185,394KB 2,832,550KB 3,017,944KB config 1,682KB 1,601,538KB 1,603,220KB dump0 2,816KB 326,416KB 329,232KB dump1 998KB 1,064,674KB 1,065,672KB log 11KB 137,207KB 137,218KB total 190,901KB 5,962,385KB 6,153,286KB > |
[表示説明]
表示項目 |
表示内容 |
表示詳細情報 |
|
---|---|---|---|
Warning threshold |
未使用容量が減少したことを警告する閾値※1 |
<value>:警告閾値 |
|
Recovery threshold |
未使用容量が増加して警告状態から回復したことを通知する閾値※1 |
<value>:回復閾値 |
|
Flash monitor event level |
イベントレベル※1 |
<value>:flash-monitorイベントレベル |
|
Flash |
− |
内蔵フラッシュメモリの状態 |
enabled:アクセス可能 notconnect:BCU未搭載 --------:不明※2 |
area |
内蔵フラッシュメモリの領域※3 |
user:ユーザ領域 config:コンフィグ領域 dump0:BCU OSダンプ領域 dump1:アプリケーションダンプ領域 log:ログ領域 total:上記領域の合計 |
|
used |
使用容量※3※4※5 |
areaで指定された領域のファイルシステム使用容量 |
|
free |
未使用容量※3※4※5 |
areaで指定された領域のファイルシステム未使用容量 |
|
total |
合計容量※3※4※5 |
areaで指定された領域のファイルシステム使用容量と未使用容量の合計容量 |
[通信への影響]
なし
[応答メッセージ]
メッセージ |
内容 |
---|---|
The command cannot be executed. Try again. |
コマンドを実行できません。再実行してください。 |
The command is not authorized by the RADIUS/TACACS+ server or the configuration. |
このコマンドはRADIUSサーバ,TACACS+サーバ,またはコンフィグレーションで承認されていません。 |
[注意事項]
なし