運用コマンドレファレンス Vol.3
BFDで管理している次の統計情報をクリアします。
- 送受信BFDパケット数(Packets Counter)
- セッションのアップ回数(Up Count)
- 最後にアップした時刻(Last Up Time)
- 最後にダウンした時刻(Last Down Time)
- 最後のダウン要因(Diagnostic)
[入力形式]
clear bfd statistics
[入力モード]
一般ユーザモードおよび装置管理者モード
[パラメータ]
なし
[実行例]
図15-5 BFD統計情報のクリア
> clear bfd statistics >
[表示説明]
なし
[通信への影響]
なし
[応答メッセージ]
表15-8 clear bfd statisticsコマンドの応答メッセージ一覧
メッセージ 内容 The command cannot be executed because another user is executing a BFD command. Wait a while, and then try again. ほかのユーザがBFDコマンドを実行中のため,コマンドを実行できません。しばらくしてから再実行してください。 The command cannot be executed because the connection to the BFD program failed. BFDプログラムとの通信が失敗しました。コマンドを再実行してください。頻発する場合は,restart bfdコマンドでBFDプログラムを再起動してください。 The command cannot be executed in the standby system. このコマンドは待機系では実行できません。 The command cannot be executed. Try again. コマンドを実行できません。再実行してください。 The command is not authorized by the RADIUS/TACACS+ server or the configuration. このコマンドはRADIUSサーバ,TACACS+サーバ,またはコンフィグレーションで承認されていません。
[注意事項]
- 本コマンドを実行して統計情報をクリアした場合,axBfdSessグループ内の次の統計情報もクリアされます。
- axBfdSessUpTime
- axBfdSessPerfLastSessDownTime
- axBfdSessPerfLastCommLostDiag
- axBfdSessPerfSessUpCount
All Rights Reserved, Copyright(C), 2014, 2020, ALAXALA Networks, Corp.