clear loop-detection logging
L2ループ検知フレームの受信ログ情報をクリアします。
[入力形式]
clear loop-detection logging
[入力モード]
一般ユーザモードおよび装置管理者モード
[パラメータ]
なし
[実行例]
> clear loop-detection logging > |
[表示説明]
なし
[通信への影響]
なし
[応答メッセージ]
メッセージ |
内容 |
---|---|
L2 loop detection is not configured. |
L2ループ検知が設定されていないか,または機能が有効になっていません。コンフィグレーションを確認してください。 |
The command cannot be executed in the standby system. |
このコマンドは待機系では実行できません。 |
The command cannot be executed. Try again. |
コマンドを実行できません。再実行してください。 |
The command is not authorized by the RADIUS/TACACS+ server or the configuration. |
このコマンドはRADIUSサーバ,TACACS+サーバ,またはコンフィグレーションで承認されていません。 |
The connection with the L2 Loop Detection program failed. Retry the command. |
L2ループ検知プログラムとの通信に失敗しました。コマンドを再実行してください。 |
[注意事項]
なし