運用コマンドレファレンス Vol.2


dump protocols axrp

Ring Protocolプログラムで採取している制御情報をファイルへ出力します。

[入力形式]

dump protocols axrp

[入力モード]

一般ユーザモードおよび装置管理者モード

[パラメータ]

なし

[実行例]

図5‒11 Ring Protocolのダンプファイルを出力
> dump protocols axrp
>

[表示説明]

なし

[通信への影響]

なし

[応答メッセージ]

表5‒7 dump protocols axrpコマンドの応答メッセージ一覧

メッセージ

内容

The command cannot be executed. Try again.

コマンドを実行できません。再実行してください。

The command is not authorized by the RADIUS/TACACS+ server or the configuration.

このコマンドはRADIUSサーバ,TACACS+サーバ,またはコンフィグレーションで承認されていません。

The connection with the Ring Protocol program failed. Retry the command. If this problem occurs repeatedly, use 'restart axrp' to restart the program.

Ring Protocolプログラムとの通信に失敗しました。コマンドを再実行してください。頻発する場合は,restart axrpコマンドでRing Protocolプログラムを再起動してください。

The dump file could not be opened.

ダンプファイルのオープンまたはアクセスができませんでした。

The Ring Protocol program is not running.

Ring Protocolプログラムが起動していません。コンフィグレーションを確認してください。

[注意事項]

  1. 指定ファイルがすでに存在する場合は無条件で上書きするため,必要に応じてファイルをあらかじめバックアップしておいてください。出力先およびファイル名は次のとおりです。

    • ディレクトリ:/usr/var/axrp/

    • ファイル名:axrp_dump.gz