show qos queueing
次のコマンドで表示するキュー情報をすべて表示します。
-
show qos queueing bcu
-
show qos queueing pru
-
show qos queueing nif
-
show qos queueing port
[入力形式]
show qos queueing
[入力モード]
一般ユーザモードおよび装置管理者モード
[パラメータ]
なし
[実行例]
> show qos queueing
Date 20XX/01/01 12:00:00 UTC
BCU-CPU (Out)
Max-queue=8
Queue1 : Qlen=0, Limit-Qlen=256
Send packets Discard packets Send bytes
Total 0 0 0
:
:
BCU-PA (From-PRU)
Max-queue=8
Queue-total
Send packets Discard packets
Total 5616123 0
PRU1-SSW (From-FE Unicast to PRU1)
Max-queue=8
Queue1 : Qlen=0, Limit-Qlen=16384
Send packets Discard packets Send bytes
Total 3203665 0 6562233640
:
:
PRU8-FE (To-SSW Control)
Max-queue=8
Queue1 : Qlen=0, Peak-Qlen=0, Limit-Qlen=255
Discard Send packets Discard packets Send bytes
1 0 0 -
2 0 0 -
3 0 0 -
4 0 0 -
Total 0 0 0
:
:
Queue8 : Qlen=0, Peak-Qlen=35, Limit-Qlen=255
Discard Send packets Discard packets Send bytes
1 489012 0 -
2 0 0 -
3 0 0 -
4 0 0 -
Total 489012 0 18874544
NIF1/Port1 (In)
Max-queue=1
Queue1 : Qlen=0, Peak-Qlen=68, Limit-Qlen=127
Discard Send packets Discard packets Send bytes
1 8451361 0 -
2 0 0 -
3 0 0 -
4 0 0 -
Total 8451361 0 5813143900
:
:
NIF32/Port12 (Out)
Max-queue=8, Schedule-mode=pq
Port-rate-limit=100Mbps, Active-rate=100Mbps
Queue1 : Qlen=0, Peak-Qlen=51, Limit-Qlen=1023
Drop-mode=tail-drop
Discard Send packets Discard packets Send bytes
1 3203665 0 -
2 0 0 -
3 0 0 -
4 0 0 -
Total 3203665 0 46256815552
:
:
Queue8 : Qlen=0, Peak-Qlen=65, Limit-Qlen=1023
Drop-mode=tail-drop
Discard Send packets Discard packets Send bytes
1 156165 0 -
2 0 0 -
3 0 0 -
4 0 0 -
Total 156165 0 546461560
> |
[表示説明]
|
表示項目 |
表示内容 |
|---|---|
|
BCUのキュー情報 |
show qos queueing bcuコマンドの[表示説明]を参照してください。 |
|
PRUのキュー情報 |
show qos queueing pruコマンドの[表示説明]を参照してください。 |
|
NIF上のキュー情報 |
show qos queueing nifコマンドの[表示説明]を参照してください。 |
|
イーサネットインタフェースのキュー情報 |
show qos queueing portコマンドの[表示説明]を参照してください。 |
[通信への影響]
なし
[応答メッセージ]
|
メッセージ |
内容 |
|---|---|
|
The command cannot be executed. Try again. |
コマンドを実行できません。再実行してください。 |
|
The command is not authorized by the RADIUS/TACACS+ server or the configuration. |
このコマンドはRADIUSサーバ,TACACS+サーバ,またはコンフィグレーションで承認されていません。 |
[注意事項]
-
待機系BCUで本コマンドを実行した場合,BCUのキュー情報だけが表示されます。