clear bfd statistics
BFDで管理している次の統計情報をクリアします。
-
送受信BFDパケット数(Packets Counter)
-
セッションのアップ回数(Up Count)
-
最後にアップした時刻(Last Up Time)
-
最後にダウンした時刻(Last Down Time)
-
最後のダウン要因(Diagnostic)
[入力形式]
clear bfd statistics
[入力モード]
一般ユーザモードおよび装置管理者モード
[パラメータ]
なし
[実行例]
> clear bfd statistics > |
[表示説明]
なし
[通信への影響]
なし
[応答メッセージ]
メッセージ |
内容 |
---|---|
The command cannot be executed because another user is executing a BFD command. Wait a while, and then try again. |
ほかのユーザがBFDコマンドを実行中のため,コマンドを実行できません。しばらくしてから再実行してください。 |
The command cannot be executed because the connection to the BFD program failed. |
BFDプログラムとの通信が失敗しました。コマンドを再実行してください。頻発する場合は,restart bfdコマンドでBFDプログラムを再起動してください。 |
The command cannot be executed in the standby system. |
このコマンドは待機系では実行できません。 |
The command cannot be executed. Try again. |
コマンドを実行できません。再実行してください。 |
The command is not authorized by the RADIUS/TACACS+ server or the configuration. |
このコマンドはRADIUSサーバ,TACACS+サーバ,またはコンフィグレーションで承認されていません。 |
[注意事項]
-
本コマンドを実行して統計情報をクリアした場合,axBfdSessグループ内の次の統計情報もクリアされます。
-
axBfdSessUpTime
-
axBfdSessPerfLastSessDownTime
-
axBfdSessPerfLastCommLostDiag
-
axBfdSessPerfSessUpCount
-