コンフィグレーションコマンドレファレンス Vol.3


26.12 スタティックルーティング設定時のエラー

表26‒11 スタティックルーティング設定時のエラーメッセージ

メッセージ

内容

The following items conflict: the IPv4 prefix and the mask. Non-masked bits must be zero.

指定プレフィックスの非マスク・ビットに1が指定されています。

非マスク・ビットは0としてください。

The following items conflict: the IPv6 prefix and the prefix length. Non-masked bits must be zero.

指定プレフィックスの非マスク・ビットに1が指定されています。

非マスク・ビットは0としてください。

The value specified for the maximum number of IPv4 static paths cannot be set because the uRPF functionality is being used, and the specified value exceeds the maximum that can be set when the uRPF functionality is being used.

uRPF機能が使用されているため,IPv4スタティック経路の最大パス数は,uRPF併用時の最大パス数を超えて指定できません。

The value specified for the maximum number of IPv6 static paths cannot be set because the uRPF functionality is being used, and the specified value exceeds the maximum that can be set when the uRPF functionality is being used.

uRPF機能が使用されているため,IPv6スタティック経路の最大パス数は,uRPF併用時の最大パス数を超えて指定できません。