コンフィグレーションコマンドレファレンス Vol.1


19.13 IPインタフェース設定時のエラー

表19‒18 IPインタフェース設定時のエラーメッセージ

メッセージ

内容

The following items conflict: the subinterface and the mirror port cannot be set together.

ミラーポートに設定されているインタフェースに対して,サブインタフェースの設定はできません。

The following items conflict: the subinterface and the policy-based mirror port cannot be set together.

ポリシーベースミラーリングのミラーポートに設定されているインタフェースに対して,サブインタフェースの設定はできません。

The specified VLAN ID is already used on the same port or channel group.

同一ポートまたは同一チャネルグループに同じVLAN IDが設定されています。

設定内容を確認して,異なるVLAN IDを指定してください。

The VLAN ID cannot be changed because an IP address is already set.

IPアドレスが設定されているため,VLAN IDは変更できません。

VLAN IDを変更する場合は,IPアドレスを削除してください。

The VLAN ID cannot be deleted because an IP address is already set.

IPアドレスが設定されているため,VLAN IDは削除できません。

VLAN IDを削除する場合は,IPアドレスを削除してください。