dump protocols bfd
BFDプログラムで採取している制御情報をファイルへ出力します。
[入力形式]
dump protocols bfd
[入力モード]
一般ユーザモードおよび装置管理者モード
[パラメータ]
なし
[スタック構成時の運用]
未サポートです。
[実行例]
> dump protocols bfd > |
[表示説明]
なし
[通信への影響]
なし
[応答メッセージ]
メッセージ |
内容 |
---|---|
Command execution failed because the BFD program is not running. |
BFDプログラムが起動していないため,コマンドを実行できません。 |
The command cannot be executed because another user is executing a BFD command. Wait a while, and then try again. |
ほかのユーザがBFDコマンドを実行中のため,コマンドを実行できません。しばらくしてから再実行してください。 |
The command cannot be executed because the connection to the BFD program failed. |
BFDプログラムとの通信が失敗しました。コマンドを再実行してください。頻発する場合は,restart bfdコマンドでBFDプログラムを再起動してください。 |
The command cannot be executed. Try again. |
コマンドを実行できません。再実行してください。 |
The dump command failed. The amount of free disk space on the device might be insufficient. Delete unnecessary files, and then try again. |
本装置のディスク空き容量が不足しているおそれがあります。不要なファイルを削除したあと再実行してください。 |
The dump file could not be opened. |
ダンプファイルのオープンまたはアクセスができませんでした。 |
[注意事項]
- 指定ファイルがすでに存在する場合は無条件で上書きするため,必要に応じてファイルをあらかじめバックアップしておいてください。出力先およびファイル名は次のとおりです。
-
ディレクトリ:/usr/var/bfd
ファイル名:bfdd_trace.tar.gz
ファイル名:bfdd_dump.gz