load web-authentication
Web認証ユーザ情報のバックアップファイルからWeb認証ユーザ情報を復元します。なお,以下のコマンドで登録・変更された内容は廃棄されて,復元する内容に置き換わります。
-
set web-authentication user
-
set web-authentication passwd
-
set web-authentication vlan
-
remove web-authentication user
-
commit web-authentication
[入力形式]
load web-authentication <file name> [-f]
[入力モード]
装置管理者モード
[パラメータ]
- <file name>
-
Web認証ユーザ情報を復元するバックアップファイル名を指定します。
- -f
-
確認メッセージを出力しないで,Web認証ユーザ情報を復元します。
- 本パラメータ省略時の動作
-
確認メッセージを出力します。
[スタック構成時の運用]
未サポートです。
[実行例]
- Web認証ユーザ情報のバックアップファイル"authdata"から復元する場合
# load web-authentication authdata Restore web-authentication user data. Are you sure? (y/n): y Restore complete.
[表示説明]
なし
[通信への影響]
なし
[応答メッセージ]
メッセージ |
内容 |
---|---|
Can not load. |
Web認証ユーザ情報の反映に失敗しました。restart web-authenticationコマンドを実行後に,再度load web-authenticationコマンドを実行してWeb認証ユーザ情報を復元してください。 |
Can't execute. |
コマンドを実行できません。再実行してください。 |
Connection failed to WA program. |
Web認証プログラムとの通信が失敗しました。コマンドを再実行してください。頻発する場合は,restart web-authenticationコマンドでWeb認証プログラムを再起動してください。 |
File format error. |
バックアップファイルではないため,登録できません。 |
Load operation failed. |
バックアップファイルからの復元に失敗しました。 |
Now another user is using WA command, please try again. |
ほかのユーザがWeb認証機能のコマンドを使用中です。しばらくしてから再実行してください。 |
WA is not configured. |
Web認証機能が設定されていません。コンフィグレーションを確認してください。 |
[注意事項]
-
以下のコマンドで登録・変更された内容は廃棄されて,復元する内容に置き換わるので注意してください。
-
set web-authentication user
-
set web-authentication passwd
-
set web-authentication vlan
-
remove web-authentication user
-
commit web-authentication
-
-
本コマンドを実行中に中断した場合,Web認証DBの情報は書き換えられません。この場合,本コマンドを再度実行してWeb認証DBの情報を書き換えてください。