コンフィグレーションガイド Vol.2


23.3.5 CFMの状態の確認

show cfmコマンドで,CFMの設定状態と障害検知状態を表示します。CCで障害を検知した場合,検知した障害の中で,最も障害レベルの高い障害種別を「Status」で確認できます。

図23‒36 show cfmコマンドの実行結果
>show cfm
Date 20XX/03/15 18:32:10 UTC
Domain Level 3 Name(str): ProviderDomain_3
  MA 300   Name(str) : Tokyo_to_Osaka
    Primary VLAN:300   VLAN:10-20,300
    CC:Enable   Interval:1min
    Alarm Priority:3  Start Time:2500ms  Reset Time:10000ms 
    MEP Information
      ID:8012  UpMEP    CH12(Up)    Enable   MAC:0012.e200.00b2  Status:Timeout
  MA 400   Name(str) : Tokyo_to_Nagoya
    Primary VLAN:400   VLAN:30-40,400
    CC:Enable   Interval:1min
    Alarm Priority:3  Start Time:2500ms  Reset Time:10000ms
    MEP Information
      ID:8014  DownMEP  0/21(Up)    Disable  MAC:0012.e220.0040  Status:-
  MIP Information
      0/12(Up)    Enable   MAC:0012.e200.0012
      0/22(Down)  Disable  MAC:-
Domain Level 4 Name(str): ProviderDomain_4
  MIP Information
      CH12(Up)    Enable   MAC:0012.e220.00b2
>